Specification Sheet

Features:
 Prototype DIY PCB Terminal Block Board Kit for Raspberry Pi, you can make
DIY for your Raspberry Pi project. Support for Raspberry Pi 1 Model A+, Pi 1
Model B+, Pi 2 Model B, Pi 3 Model B, Pi 3 Model B+, Pi 4 Module B, Pi Zero or
Pi Zero W.
 The kit include prototype PCB, terminal blocks, terminal block labels, pin head
connector, standoffs, screws, resistor and LED. (Note: the item not include
Raspberry Pi board).
 PCB: FR-4 fiber glass PCB, dual copper layers, size 111.5mm x 117.5mm,
pads grid / pitch 2.54mm, hole diameter 1mm.
 Terminal block pitch 3.5mm/0.138", wire size range 26AWG to 16AWG, strip
length 5mm, screw M2 steel, pin header and cage copper.
 Video usage guidelines:
https://youtu.be/Htzei-gBfzc