EE-213R - EE-213R Rev 0 Electronic Shelf Label The EE-213R is a black/white/red e-paper based electronic shelf label with a screen size of 2.13” and with 802.15.4 based wireless communication.
EE-213R Rev 0 The information in this document is subject to change without notice. Document History Model Number: Revision: EE-213R Rev 0 Original release date Date 09-10-2018 09-10-2018 2016 Copyright Opticon. All rights reserved. This manual may not, in whole or in part, be copied, photocopied, reproduced, translated or converted to any electronic or machine readable form without prior written consent of Opticon.
EE-213R Rev 0 Revision History Product Name : EE-213R Edition V0 Date 10-10-2018 Page - Section - Description of Changes Preliminary Version 3
EE-213R Rev 0 Contents 1 Abstract............................................................................................................................6 2 Overview ..........................................................................................................................6 3 Physical Features............................................................................................................6 4 3.1 Dimensions ..............................................................
EE-213R Rev 0 Table of Figures Figure 1: Dimensions............................................................................................................................... 6 Figure 2: Product Label ......................................................................................................................... 11 Figure 3: Product Label dimensions ...................................................................................................... 11 Figure 4: Shipment box label ..........
EE-213R Rev 0 1 Abstract This manual provides specifications for the EE-213R Electronic Shelf Label (hereafter referred to as “ESL”). 2 Overview The EE-213R is an electronic shelf label with a black, white and red e-paper display and a 2.4GHz radio for data communication. This product uses Direct Sequence Spread Spectrum RF technology that allows for ultra-low power consumption combined with a reduced sensitivity to background noise. That means less interference by other radios that operate in the 2.
EE-213R Rev 0 4 Environmental Specifications 4.1 Operating Temperature and Humidity Temperature: Humidity: 4.2 Storage Temperature and Humidity Temperature: Humidity: 4.
EE-213R Rev 0 5 Controls Items CPU LCD Radio Specifications Remarks Type 8051 core 8-bit MCU Internal flash ROM 96KB Internal RAM 6 KB Clock frequency 32 MHz Active area W 48.55 x H 23.71mm Number of dots W 212 x H 104 A dot can become red, black or white Dot pitch 111 Horizontal 111 Vertical Dots per Inch Modulation DSSS Frequency 2394 ~ 2507 MHz Baud rate 250 Kbits / second Globally approved 2.4GHz band.
EE-213R Rev 0 6 Electrical Specifications 6.1 Electrical Characteristics Conditions: Operating voltage 3.0V unless otherwise specified Parameter Unit Remarks Operating voltage 1.9~3.3 V Two CR2540 Lithium primary batteries Sleep current <1 µA When the transmitter and receiver are idle Minimum poll interval >= 20 seconds See below The ESL is in sleep mode almost the entire time.
EE-213R Rev 0 For example: • Increasing the poll interval improves the battery life • Turning off the base stations shortens the battery life. • A lower operating temperature (below 15° C) shortens the battery life. • More display updates per day shortens the battery life. 7 Radio Specifications Parameter Min Receiver sensitivity Nominal output power Frequency 7.1 -3 Typ Max Unit -97 -89 dBm 4.5 7 dBm 2480 MHz Over the entire temp.
EE-213R Rev 0 8 Labeling 8.1 Product Label The product label is affixed to the ESL as shown below. Figure 2: Product Label Label material: Material: Base + laminate protection against wear. Base: PP film, thickness 80µm, backing with glue. Laminate: PET film, clear, thickness 25µm. RoHS compliant Label dimension: 36 x 19 mm (w x h) Tolerance ± 0.1mm Corner radius 1mm Radius 1mm 19.0 mm 36.
EE-213R 8.2 Rev 0 Shipment Box Label The shipment box labels are meant to show the regulatory information on the shipment box as well as the quantity in the box. The labels are 150mm*95mm and are made from plain paper with adhesive backing.
EE-213R Rev 0 9 Packaging Specifications 9.1 Individual Packaging Specification The ESL’s do not need to be packed separately. To easily pack them, 30 pcs need to be packed in a plastic tray: Figure 5: Individual packaging 9.2 Collective Packaging Specification Pack the tray with 30 EE-213R’s in a plastic bag, fold the open end of the bag and fix it with a piece of tape. Attach two pouches with Silica Gel to the bottom of the tray and then slide the tray in the plastic bag.
EE-213R Rev 0 Figure 6: collective packaging Put 10 stacks, containing 300 ESL’s inside a box and stick the shipment box label on the indicated position. Use cardboard and a plastic bag between each layer of ESL’s as shown below. Cardboard Plastic bag Attach two bags of Silica Gel (2 gram each) at the bottom of a tray. Then put a plastic bag around it and seal it air tight. Finally put a cardboard plate on top of the tray.
EE-213R Rev 0 10 Regulatory Compliance Hereby, Opticon Sensors Europe B.V. declares that the radio equipment type EE-213R is in compliance with Directive 2014/53/EU and FCC requirements. The full text of the Declaration of Conformity is available at the following internet address: www.opticon.com/product/EE-213R Federal Communications Commission (FCC) Statement 15.
EE-213R Rev 0 10.1 WEEE Waste Electrical and Electronics Equipment Directive, 2012/19/EU. 10.1.1 Disposal This appliance is marked according to the European directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE). By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product.
EE-213R Rev 0 11 Safety Handle this product carefully. Do not deliberately subject it to any of the following. 11.1 Shock Do not throw or drop the ESL. Do not place heavy objects on the ESL. 11.2 Temperature Conditions Do not use the ESL at temperatures outside the specified range. Do not pour boiling water on the ESL. Do not throw the ESL into the fire. Do not leave the ESL on the dashboard of a car. 11.3 Foreign Materials Do not immerse the ESL in liquids. Do not subject the ESL to chemicals. 11.
EE-213R Rev 0 12 Mechanical Drawing 69.9 34.7 11.5 Opticon Sensors Europe B.V.
