Installation Instructions

EE-213R Rev 0
11
8 Labeling
8.1 Product Label
The product label is affixed to the ESL as shown below.
Figure 2: Product Label
Label material:
Material: Base + laminate protection against wear.
Base: PP film, thickness 80µm, backing with glue.
Laminate: PET film, clear, thickness 25µm.
RoHS compliant
Label dimension:
36 x 19 mm (w x h)
Tolerance ± 0.1mm
Corner radius 1mm
Figure 3: Product Label dimensions
Barcode area:
The size of the barcode area (without the human readable part) is 3x38mm).
The barcode shows the product serial number. This is a ‘B’ followed by 10 hexadecimal digits.
This serial number is the same as the MAC address in the ESL-label, with the first 6 digits
(‘3889DC’) replaced by a ‘B’.
36.0mm
19.0 mm
Radius 1mm