Operation Manual

ManualsBrandsOptoma ManualsOtherEP729

... English

Table of Contents

Table of Contents ....................................................................................... 1

Usage Notice .............................................................................................. 2

Precautions ......................................................................................................... 2

Introduction ............................................................................................... 4

Product Features ................................................................................................. 4

Package Overview ............................................................................................... 5

Product Overview ................................................................................................ 6

Main Unit ......................................................................................................................... 6

Control Panel .................................................................................................................. 7

Connection Ports ............................................................................................................ 8

Remote Control with Mouse Function & Laser Pointer .................................................... 9

Installation ................................................................................................ 10

Connecting the Projector ................................................................................... 10

Powering On/Off the Projector ............................................................................. 11

Powering On the Projector ............................................................................................ 11

Powering Off the projector ............................................................................................ 12

Warning Indicator ......................................................................................................... 12

Adjusting the Projected Image ........................................................................... 13

Adjusting the Projector Image Height ........................................................................... 13

Adjusting the Projector Zoom / Focus .......................................................................... 14

Adjusting Projected Image Size ................................................................................... 14

User Controls .......................................................................................... 15

Control Panel & Remote Control ........................................................................ 15

On-Screen Display Menus ................................................................................ 17

How to operate .............................................................................................................. 17

Menu Tree ..................................................................................................................... 18

Language ...................................................................................................................... 19

Colour Setting ............................................................................................................... 19

Image-I ......................................................................................................................... 20

Image-II ........................................................................................................................22

Management ................................................................................................................. 23

Lamp Setting ................................................................................................................ 25

Appendices ............................................................................................... 26

Troubleshooting ................................................................................................. 26

Replacing the lamp ............................................................................................ 30

Compatibility Modes .......................................................................................... 31

Summary of content (31 pages)

PAGE 1
Table of Contents Table of Contents ....................................................................................... 1 Usage Notice .............................................................................................. 2 Precautions ......................................................................................................... 2 Introduction ............................................................................................... 4 Product Features ...........................
PAGE 2
Usage Notice Precautions Follow all warnings, precautions and maintenance as recommended in this user’s guide to maximize the life of your unit. Warning- Do not look into the projector’s lens when the lamp is on. The bright light may hurt your eyes. Warning- To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. Warning- Please do not open or disassemble the product as this may cause electric shock.
PAGE 3
Usage Notice Do: Turn off the product before cleaning. Use a soft cloth moistened with mild detergent to clean the display housing. Disconnect the power plug from AC outlet if the product is not being used for a long period of time. Don’t: Block the slots and openings on the unit provided for ventilation. Use abrasive cleaners, waxes or solvents to clean the unit. Use under the following conditions: - In extremely hot, cold or humid environments.
PAGE 4
Introduction Product Features This product is an XGA single chip 0.7” DLPTM projector. Outstanding features include: True XGA, 1024 x 768 addressable pixels Single chip DLPTM technology NTSC/NTSC4.
PAGE 5
Introduction Package Overview This projector comes with all the items shown below. Check to make sure your unit is complete. Contact your dealer immediately if anything is missing. Projector with lens cap Composite Video Cable 1.8m Due to the difference in applications for each country, some regions may have different accessories. 2 x Battery Power Cord 1.8m VGA Cable 1.
PAGE 6
Introduction Product Overview Main Unit 1 8 2 3 7 4 6 5 8 1 10 9 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. English ...
PAGE 7
Introduction Control Panel 7 1 2 3 4 10 5 9 8 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 7 6 Temp Indicator LED Power Indicator LED Lamp Indicator LED Power/Standby Menu (On/Off) Re-Sync Keystone Correction Four Directional Select Keys Source Enter 7 ...
PAGE 8
Introduction Connection Ports 1 7 6 5 4 3 2 1. IR Receiver 2. Power Socket 3. PC Analog signal/SCART RGB/HDTV/Component Video Input Connector 4. Composite Video Input Connector 5. S-Video Input Connector 6. USB Input Connector 7. KensingtonTM Lock Port English ...
PAGE 9
Introduction Remote Control with Mouse Function & Laser Pointer 1 1 3 7 8 9 10 16 1. 2. 5 3. 4. 6 5. 6. 7. 8. 11 9. 10. 11. 4 15 12 12. 14 13 14. 13. 15. 16. IR LED Laser Pointer Laser Indicator LED Laser Button Auto Image Enter Freeze Power Source Menu Four Directional Select Keys Keystone Correction Mouse Right Click Mouse Left Click Hide Mouse 9 ...
PAGE 10
Installation Connecting the Projector RGB USB 6 2 1 7 4 DVD Player, Settop Box, HDTV receiver 5 3 Video Output Due to the difference in applications for each country, some regions may have different accessories. S-Video Output 1. ............................................................................................................. Power Cord 2. .............................................................................................................. VGA Cable 3. ..................
PAGE 11
Installation Powering On/Off the Projector Powering On the Projector 1. Remove the lens cap. n 2. Ensure that the power cord and signal cable are securely connected. The Power LED will turn Orange. 3. Turn on the lamp by pressing “Power/Standby” button on the control panel. o The startup screen will display for 10 seconds and the Power LED will turn green. 4. Turn on your source (computer, notebook, video player, etc.). The projector will detect your source automatically.
PAGE 12
Installation Powering Off the Projector 1. Press the “Power/Standby” button to turn off the projector lamp, you will see a message as below on the on-screen display. 2. Press the “Power/Standby” button again to confirm. Otherwise the message will disappear after 25 seconds. 3. The cooling fans continue to operate for about 120 seconds for cooling cycle and the Power LED will flash orange. When the light stops flashing, the projector has entered standby mode.
PAGE 13
Installation Adjusting the Projected Image Adjusting the Projector Image Height The projector is equipped with an elevator foot for adjusting the image height. To raise the image: 1. Press the elevator button n. 2. Raise the image to the desired height angle o, then release the button to lock the elevator foot into position. 3. Use p to fine-tune the display angle. To lower the image: 1. Press the elevator button. 2. Lower the image, then release the button to lock the elevator foot into position. 3.
PAGE 14
Installation Adjusting the Projector Zoom / Focus You may turn the zoom lever to zoom in or out. To focus the image, rotate the focus ring until the image is clear. The projector will focus at distances from 4.9 to 32.8 feet (1.5 to 10.0 meters). Zoom Lever Focus Ring Adjusting Projection Image Size 246.1" (625.0cm) Diagonal 73.8" (187.5cm) 36.9" (93.8cm) 31.7" (80.5cm) 63.4" (160.9cm) 123.0" (312.5cm) 105.6" (268.2cm) 172.2" (437.5cm) 147.8" (375.5cm) 196.9" (500.0cm) 169.0" (429.2cm) 211.
PAGE 15
User Controls Control Panel & Remote Control There are two ways for you to control the functions: Remote Control and Control Panel. Control Panel Remote Control Using the Control Panel Power/Standby 4 Refer to the “Power On/Off the Projector” section on pages 11-12. Source 4 Press “Source” to choose RGB, Component-p, Component-i, S-Video, Composite Video and HDTV sources. Menu 4 Press “Menu” to launch the on screen display (OSD) menu. To exit OSD, press “Menu” again.
PAGE 16
User Controls Using the Remote Control Power 4 Refer to the “Power On/Off the Projector” section on pages 11-12. Source 4 Press “Source” to choose RGB, Component-p, Component-i, S-Video, Composite Video and HDTV sources. Auto 4 Automatically synchronizes the projector to the input source. Keystone 4 Adjusts image distortion caused by tilting the projector (±8 degrees). Press “Keystone” button, then use setting. to adjust the Hide 4 “Hide” immediately turns the screen black.
PAGE 17
User Controls On Screen Display Menus The Projector has multilingual On Screen Display menus that allow you to make image adjustments and change a variety of settings. The projector will automatically detect the source. How to operate 1. To open the OSD menu, press “Menu ” on the Remote Control or Control Panel. 2. When OSD is displayed, use keys to select any item in the main menu. While making a selection on a particular page, press or “Enter” key to enter sub menu. 3.
PAGE 18
User Controls Menu Tree English ...
PAGE 19
User Controls Language Language Choose the multilingual OSD menu . Use the your preferred language. or key to select Press “Enter” to finalize the selection. Colour Setting Colour Setting Adjust the Red, Green, Blue, Yellow, Cyan and Magenta colors for advanced adjustment of the individual colors. 19 ...
PAGE 20
User Controls Image-I Display Mode There are many factory presets optimized for various types of images. 4 PC: For computer or notebook. 4 Movie: For home theater. 4 sRGB: For standard color. 4 User: Memorize user’s settings. Brightness Adjust the brightness of the image. 4 Press the to darken image. 4 Press the Contrast to lighten the image. The contrast controls the degree of difference between the lightest and darkest parts of the picture.
PAGE 21
User Controls Saturation “Saturation” function is not supported under computer mode. Adjusts a video image from black and white to fully saturated color. 4 Press the to decrease the amount of color in the image. 4 Press the to increase the amount of color in the image. Sharpness Adjusts the sharpness of the image. 4 Press the 4 Press the to decrease the sharpness. to increase the sharpness. 21 ...
PAGE 22
User Controls Image-II Frequency “Frequency”changes the display data frequency to match the frequency of your computer’s graphic card. If you experience a vertical flickering bar, use this function to make an adjustment. Phase “Frequency/Phase/ Hor. Position/Ver. position” function is not supported under video mode. “Phase” synchronizes the signal timing of the display with the graphic card. If you experience an unstable or flickering image, use this function to correct it. Hor.
PAGE 23
User Controls Management Menu Location Choose the menu location on the display screen. Projection 4 Front-Desktop The factory default setting. 4 Rear-Desktop When you select this function, the projector reverses the image so you can project behind a translucent screen. 4 Front-Ceiling When you select this function, the projector turns the image upside down for ceiling-mounted projection.
PAGE 24
User Controls Translucence Choose the menu transparency on the display screen. Reset Return the adjustments and settings to the factory default values. 4 Execute: Returns the settings for all menus to factory default values. 4 Cancel: Cancel the revised settings English ...
PAGE 25
User Controls Lamp Setting Projection Hours Display the projection time. Lamp Hours Display the cumulative lamp operating time. Lamp Reset Reset the lamp life hour after replacing a new lamp. Lamp Reminding Choose this function to show or to hide the warning message when the changing lamp message is displayed. The message will show up 30 hours before end of life. ECO Mode Choose “On” to dim the projector lamp which will lower power consumption and extend the lamp life by up to 130%.
PAGE 26
Appendices Troubleshooting If you experience trouble with the projector, refer to the following information. If the problem persists, please contact your local reseller or service center. Problem: No image appears on screen. 4 Ensure all the cables and power connections are correctly and 4 4 4 securely connected as described in the “Installation” section. Ensure the pins of connectors are not crooked or broken. Check if the projection lamp has been securely installed.
PAGE 27
Appendices 4. Verify the resolution setting is less than or equal to 1280 x 1024 resolution. 5. Select the “Change” button under the “Monitor” tab . 6. Click on “Show all devices.” Next, select “Standard monitor types” under the SP box; choose the resolution mode you need under the “Models” box. 4 If you are using a Notebook: 1. First, follow the steps above to adjust resolution of the computer. 2. Press the toggle output settings.
PAGE 28
Appendices Problem: Image is out of focus 4 Adjusts the Focus Ring on the projector lens. Refer to page 14. 4 Make sure the projection screen is between the required distance 4.9 to 32.8 feet (1.5 to 10.0 meters) from the projector. Problem: The image is stretched when displaying 16:9 DVD. The projector automatically detects 16:9 DVD and adjusts the aspect ratio by digitizing to full screen with 4:3 default setting.
PAGE 29
Appendices Problem: Message Reminders 4 Standby : 4 Replacing the lamp : 29 ...
PAGE 30
Appendices Replacing the lamp The projector will detect the lamp life itself. It will show you a warning message “Lamp life exceeded” When you see this message, change the lamp as soon as possible. Make sure the projector has been cooled down for at least 30 minutes before changing the lamp. Warning: Lamp compartment is hot! Allow it to cool down before changing lamp! 1 3 2 4 Lamp Replacing Procedure: Warning: To reduce the risk of personal injury, do not drop the lamp module or touch the lamp bulb.
PAGE 31
Appendices Compatibility Modes Remark : 1.> “*”compressed computer image. 2.> The interlaced analog signals are not supported. Mode Resolution VESA VGA VESA VGA (ANALOG) V.Frequency (Hz) H.Frequency (kHz) 640 x 350 70 31.5 640 x 350 85 37.9 VESA VGA 640 x 400 85 37.9 VESA VGA 640 x 480 60 31.5 VESA VGA 640 x 480 72 37.9 VESA VGA 640 x 480 75 37.5 VESA VGA 640 x 480 85 43.3 VESA VGA 720 x 400 70 31.5 VESA VGA 720 x 400 85 37.9 SVGA 800 x 600 56 35.