Welcome to SMART HOSE FAUCET TIMER with WIFI HUB User’s Guide
Congratulations on the purchase of your B-hyve Smart Hose Faucet Timer with Wi-Fi Hub! Faucet watering has never been faster, easier or more convenient with the ability to control it from your phone. You can schedule, manually operate and monitor flow without climbing through your shrubs to access the timer. With the addition of a hub you can connect to the Internet and have your timer automatically update and adjust based on the weather forecast.
Meet the B-hyve App Home Screen Tap to Switch Devices Local Temperature Timer Connected/ Reconnect to Bluetooth Button Battery Life Running Status/ Messaging Stop Watering Next Zone Rain Delay Calendar Settings Programs Zone List Remote Control or Home Button Initial B-hyve App Setup 1) Download the B-hyve App If you don’t already have the B-hyve App on your smart device, search for “B-hyve” and download the free Android or iOS app.
Intitial B-hyve Hub Setup 1) Power Your Wi-Fi Hub Plug the Wi-Fi hub into an indoor outlet. 2) Pair Your Hub The B-hyve App has a wizard that will guide you through pairing. Choose an indoor location for your hub near the outside location of your timer and within range of Wi-Fi. Avoid areas where the signal must travel through more than one wall, dirt, or thick steel barriers.
Additional B-hyve Timer Features Manual Watering Your timer has the ability to allow you to manually water without disturbing the programmed schedule. Manual is used to test equipment, run an extra watering cycle in an area, or to use the hose faucet without removing the timer. Press and hold the on/off button for 3 seconds to activate manual watering. Using the B-hyve app you can set how long you want the preset manual cycle to run for. Go to Settings>Devices>Device>Preset Runtime.
Table 1: Hose Faucet Timer LED Light Light Color Light Type Light Type Duration Description Blue Blink Every 2 sec. for 10 min. In pairing mode, ready to connect to your smart device Blue/White Alternating 3 sec. Bluetooth connected successfully Green Blink Every 5 sec. for 5 min. Watering Red Blink Every 5 sec. Low Battery: Low battery indication at 2.6V and valve shutoff at 2.5V Yellow Blink Every 10 sec.
Timer Range: 150 ft without interference Pressure operating range: 10-100 psi Temperature operating range: 32°f-158°f (0-70°c) For outdoor use with cold water only Not for use with appliances Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel cadmium) batteries. Used up or dead batteries must be removed from the timer and disposed of properly. WARNING: Battery must be removed from the timer before it is scrapped. Do not dispose of batteries in fire. Batteries may explode or leak.
numériques de classe B, selon la section 15 de la Règlementation de la FCC. Ces limites sont conçus pour fournir une protection raisonnable contre les interférences nuisibles dans une installation résidentielle. Cet appareil produit, utilise et peut émettre de l’énergie radio fréquence et, si elle n’est pas installée et utilisée conformément aux instructions, peut causer des interférences nuisibles aux communications radio.
examination of the returned Product, that the Product is an Ineligible Product (defined below). Orbit will bear all costs of return shipping to owner and will reimburse any shipping costs incurred by the owner, except with respect to any Ineligible Product, for which owner will bear all shipping costs. 4.