Installation Guide

WELCOME TO
QUICKSTARTGUIDE
Box Contents
Hose Faucet Timer
Wi-Fi Hub
Quick Start Guide
1) Download the B-hyve App
Search for “B-hyve” and download the
free Android or iOS app. Create an
account to begin timer setup.
Already a B-hyve user?
Log in to your existing
B-hyve account.
2) Power and Pair Your Wi-Fi Hub
Plug the Wi-Fi Hub into an indoor outlet.
Your hub is now ready to pair, the B-hyve App has a wizard that will
guide you through pairing.
Choose an indoor location for your hub near the outside
location of your timer and within range of Wi-Fi.
Avoid areas where the signal must travel through more than
one wall, dirt, or thick steel barriers.
If at any time you need to
re-pair, press the on/off
button quickly 5 times.
*Batteries are sold separately.
Replace batteries when timer flashes
a red light every 5 seconds, or when
the app notifies you that batteries
need replacing.
3) Insert Two AA Batteries*
Your timer is now in pairing mode and
will flash a blue light every 5 seconds.
You will also hear two clicks about
6 seconds apart, this is normal and
ensures the valve is closed before you
turn on the water.
4) Install the Timer
Your timer is now ready to be
used with any product that can be
attached to a standard hose faucet.
5) Turn on Your Water
The water must remain on for
the timer to work properly.
Do not place the timer in an
underground valve box.
on/off
1.89
[ 48]
4.882
[ 124]
17.008
[ 432]