Product Manual

12
OREGON® Cordless Tool System
CHAIN SAW MODEL CS300
SAFETY RULES
AA 1214 - F/N 573259
BAR
This saw comes equipped with a reduced
kickback guide bar that has a small radius
nose. Smaller radius noses have less
potential for kickback than a bar of the
same size with a larger nose radius.
When replacing the bar, only order the
bar listed in this manual to maintain low
kickback performance.
STORAGE, TRANSPORTING,
AND DISPOSAL
STORING THE CHAIN SAW
• Remove the battery pack from the chain
saw.
• Clean chain saw thoroughly.
• Install the blade cover.
• Store in a dry place.
• Keep out of reach of children or pets.
• It is normal for a small amount of oil to
seep from the guide bar when the chain
saw is not in use. To protect against
seepage, install the blade cover and
place an absorbent pad under the bar.
STORING THE BATTERY PACK
When storing the battery pack longer
than nine months, follow these
guidelines:
• Remove the battery pack from the chain
saw or charger.
• Store in a cool, dry place.
• Keep out of reach of children or pets.
• To prolong battery life, never store battery
pack in a completely discharged condition
(with no indicator lights lit) (Fig. ).
• For maximum battery life, make sure the
battery pack is charged once per year or
when the LED indicator shows only one
light.
• Store at a temperature between -°F to
°F (-°C and °C).
STORING THE CHARGER
• Remove battery pack from the charger.
• Disconnect charger from power source.
• Store in a dry place.
• Keep out of reach of children or pets.
See “Maintenance and Cleaning” for more
information.
TRANSPORTING THE CHAIN SAW
• Remove battery pack from the chain
saw.
• Install the blade cover.
• If desired, drain the bar and chain oil to
reduce seepage.
• Carry saw with bar and chain facing
behind the operator.
• Tools can shift during transport. Ensure
the tool is secure and cannot fall or
move into contact with people or
property.
TRANSPORTING THE BATTERY PACK
Observe respective local and national
regulations when shipping lithium ion
batteries, compulsory labeling may be
required.
FIG. 6
INDICATOR LIGHTS