Operation Manual

ManualsBrandsOregon Scientific ManualsBathroom ScalesBWR101

ADJUST THE SETTING OF THE REMOTE DISPLAY UNIT

1. enter the setting mode.

2. set the display format.

3. set the hour.

4. set the minute.

5. set the year.

6. set the date-month format.

7. set the month.

8. set the date.

WIRELESS BODY WEIGHT

MODEL : BWR101

USER’S MANUAL

set

Summary of content (9 pages)

PAGE 1
GB WIRELESS BODY WEIGHT MODEL : BWR101 USER’S MANUAL ADJUST THE SETTING OF THE REMOTE DISPLAY UNIT 1. enter the setting mode. 2. set the display format. set 1 2 3. set the hour. 1 2 4. set the minute. set 1 2 8. set the date. set 1 2 7. set the month. set 1 2 6. set the date-month format. set 1 2 5. set the year.
PAGE 2
GB 9. set the format of the measurement unit. 1 2 set ACQUIRE WEIGHT FROM SCALE 1. select the display unit on scale. RESET lb 2. step on the scale. 3. stand still till reading come out. Note: Beep sound to indicate 10 end of measurement. 4. step off the scale. Note: Repeat step 2 - 3 for next measurement.
PAGE 3
GB STORE WEIGHT TO REMOTE DISPLAY UNIT 1. take measurement from scale. 2. activate receiving mode. Note: Beep sound to indicate the activation of receiving mode. Receiving function will be activated for 30 sec. 1 30 3. weight received from scale. Note: Beep sound to indicate signal is being received from the scale. 4. select the user. 2 1 1 2 5. store the weight. Note: Beep sound to indicate the 1 7 weight is stored to memory. No memory for guest mode.
PAGE 4
GB USER SETTING / MEMORY RECALL FROM THE REMOTE DISPLAY UNIT 1a. select the user. 1 1 2 1b. quit user mode. 2a. recall memory. 1 1 mem 2 3 mem 2 TIPS A. install the batteries to the unit. B. when battery is first installed on both scale and remote display unit. B-1. acquire weight on scale. B-2. match the remote display unit with the scale. Note: a) beep sound to indicate the matching is activated. b) check the reading on scale and remote display unit . c) if fail, repeat step B-1 & B-2. B-3.
PAGE 5
GB C. after changing batteries of the scale, repeat step B-1 & B-2. D. after changing batteries of the remote display unit, set the clock only. E. replace all batteries when F. replace battery when appears on the scale. for scale or for remote display unit appears on remote display unit. G. memory stored in remote display unit will not be ereased after changing batteries. H. if there exist irregularity in weighing, press reset on the scale and then repeat step B-1 & B-2.
PAGE 6
GB NOTES FOR THE USER MAX 150kg A. maximum capacity: 150 kg / 330 lb / 23st8lb B. graduation: 0.1 kg / 0.2 lb 100g C. use additional foot pad for use on carpet D. power: scale - 4 x LR6 / AA / UM-3 1.5V batteries; remote display unit - 4 x LR6 / AA / UM-3 1.5V batteries E. avoid soft and unlevelled grounding F. do not store the scale erect G. do not load the scale when not in use H. avoid from wet CL EA NE RR I.
PAGE 7
GB EC-DECLARATION OF CONFORMITY This product contains the approved transmitter module TX 01 and complies with the essential requirements of Article 3 of the R&TTE 1999/5/EC Directives, if used for its intended use and that the following standard(s) has/have been applied: Efficient use of radio frequency spectrum (Article 3.2 of the R&TTE Directive) applied standard(s) EN 300 220-1(2,3):1997 Electromagnetic compatibility (Article 3.1.
PAGE 8
GB GB Legend: Key```` - Press key - Press and hold - Flashing F Légende: Key - Key Appuyer key - Key Appuyer et maintenir appuyer - Clignotant D Legende: Key - Betätigen key - Gedrückt halten - Blinkt I Legenda: Key - Premere il tasto key - Premere il tasto e tenerlo premuto - Flashing lampeggiante ES Leyenda: Key - Pulsar key - Pulsar y mantener oprimido - Parpadeando P Legenda: Key - Pressione key - Pressione e segure - Intermitente 8
PAGE 9
GB NOTE FOR THE USER · · Please read the manual carefully before use. The scale will calibrate automatically to provide accurate measurement when the scale is placed on the ground. Message: , will be displayed on the scale to indicate the calibration is in process. Normally it will take 2-3 seconds only. Please leave the scale alone when you see such message.