Operation Manual

C. after changing batteries of the scale, repeat step B-1 & B-2.

D. after changing batteries of the remote display unit, set the clock only.

E. replace all batteries when appears on the scale.

F. replace battery when for scale or for remote display unit appears on remote display unit.

G. memory stored in remote display unit will not be ereased after changing batteries.

H. if there exist irregularity in weighing, press reset on the scale and then repeat step B-1 & B-2.

Note:

a) place a blunt stylus into the slot to press be reset.

b) after reset please wait for few seconds for the scale to self-calibrate.

I. allow the scale to settle for around 30 min if there is a sudden change in embient environment . eg. from

an air conditioned room to an open area.

If not disposed of properly, batteries can be harmful. Protect the environment by taking

exhausted batteries to authorized disposal stations.

To extend battery life, when battery power is low, replace all the batteries.

TROUBLE SHOOTING

Symptom Description Action

1. incorrect use or weight step off the scale first and

measured is not stable. repeat the measurement.

2. scale overloaded. be sure no excessive mass is put

on scale and then repeat the

measurement.