Operation Manual

The clock and radio have separate low-battery indicators. Change

the batteries accordingly when the respective indicator lights up.

An AC Power Adapter is included. To connect it, plug it into the

power adapter connector and a wall socket.

BEFORE YOU BEGIN

The RRM-112A is designed for table stand or wall mount.

Table Stand

Place the RRM-112A on a flat, sturdy surface. You can adjust the

display angle of the LCD by lifting up the LCD panel.

Note: Unlock the latch on the back of the unit before lifting up

the LCD panel.

Wall Mount

A wall mounting guide is included. Place the mounting guide on the

wall where the RRM-112A is to be hanged. After making appropriate

markings install two mounting screws onto the wall. Hang the

RRM-112A on the mounting screws.

Note: For wall mounting the unit should be kept flat by locking the

latch on the back of the unit.

Note: The power adaptor supplies

power only to the radio. The clock

operates on batteries.