Operation Manual

4
GB
THE BACKLIGHT
Press [SNOOZE/LIGHT] button to activate the backlight. The
backlight will automatically turn itself off after 5 seonds.
SECTION 2 THE CALENDAR CLOCK
DISPLAY MODES
In normal display mode, Clock with Seconds will be displayed on
the top line of the LCD. Press the [CLOCK] button to switch
between the clock with seconds display and the day-of-the -week
display.
Press the [ ON / OFF ] button to sequence through Beep
Alarm-On, Radio Alarm-On or to disengage the alarms.
ABOUT RADIO RECEPTION
The ExactSet (TM) feature of the RRM-112A will automatically
synchronize current time and date with the signal broadcast by
the US Atomic Clock when the product is in reception range of
the signal.
When the unit is receiving radio signal, the reception icon will start
to blink. The reception icon will show either strong, weak or no
signal depending on the strength of the radio signal. A complete
reception generally takes about 2 to 5 minutes.
When the reception is completed the reception icon will stop
blinking. The reception icon will show " " for no Reception or
" " for successful reception.
For best signal reception, place the RRM-112A away from other
equipment that emit RF or microwave signals such as TV's, radios.
PC's or microwave ovens. Other causes for signal interference include
electrical power transmission towers, steel reinfoced concrete
construction, and/or metal siding. Due to the density of other
signal broadcasts, the strongest signals are received between
midnight and 4 AM.
Receiving
radio
signal
No signal Weak signal Strong signal
Reception
complete
No reception, or
Successful reception
manually adjusted