Rainbow Clock with 8 Soothing Sounds and FM Radio Model: RRM902 / RRM902U / RRM902A USER MANUAL
© 2010 Oregon Scientific. All rights reserved.
Volume control .........................................................7 Alarm ..............................................................................7 Color play.......................................................................8 MODEL: RRM902 / RRM902U / RRM902A Sleep timer .....................................................................8 Temperature ...................................................................8 Backlight ...........................................................
EN OVERVIEW 10. FRONT VIEW 11. : remote sensor reception indicator : daily alarm is on 12. VOL: volume level is displayed 1 BACK VIEW 2 3 9 10 11 12 4 5 6 7 1 2 3 4 5 6 7 8 8 9 10 11 12 13 1. SNOOZE · SOUND: activate snooze alarm; turn soothing sound on / off; select soothing sound 2. : clock signal reception indicator 14 3. ZONE: time zone offset 4. : external audio device successfully connected 5. : radio is on 6. : soothing sound is on 7.
EN 6. DIMMER: select display brightness REMOTE SENSOR 7. COLOUR (OFF·PROGRAM·LOOP): activate / deactivate color-changing light show; select preprogrammed (sound specific) light show or rainbow loop effect 8. 2 1 : set clock 9. ZZ: activate sleep timer; adjust timer settings (120, 90, 60, 30, 15, 0) 10. 3 VOL+ / VOL-: increase / decrease value of the setting; increase / decrease volume 4 5 11. RESET: reset unit to default settings 12. SEARCH: initiate sensor search 1. LED status indicator 13.
EN NOTE The main unit and adapter should not be exposed to wet conditions. No objects filled with liquid, such as vases, should be placed on the main unit and adapter. 1 x CR2032 battery for memory back-up To insert batteries: 1. Remove the battery compartment cover. 2. Insert the battery, matching the polarities. 3. Press RESET after each battery change. LOCATION TIP The transmission range may vary depending on many factors. You may need to experiment with various locations to get the best results.
RRM902U: UK: MSF-60 signal: within 1500km (932 miles) of Anthorn, England. RRM902A: US: WWVB-60 signal: within 3200km (2000 miles) of Fort Collins, Colorado. For best results: • Place the sensor out of direct sunlight and moisture. • Position the sensor so that it faces the main unit, minimizing obstructions such as doors, walls and furniture. • Place the sensor in a location with a clear view to the sky, away from metallic / electronic objects.
EN 1. Press and hold 2. Press settings. 3. Press . VOL+ or VOL- to change the to confirm. The selected sound name and will be displayed. The setting order is: time zone offset, 12/24-hour format, hour, minute. NOTE This will automatically turn off the radio. RMR902 / RMR902U: Time zone offset sets the clock +/23 hours from the received clock signal time. If you have deactivated the clock signal reception, do not set a value for time zone.
EN 4. Once desired frequency has been found, press and hold to save. Station number (e.g., where it has been stored. ALARM ) indicates To set the alarm: 5. Repeat steps 2 – 4 for all storage locations. 1. Press and hold For your convenience, the volume and radio frequency will be stored in memory for the next time radio is turned on. 2. Press settings. 3. Press To view alarm display (when radio is on): • Press . VOL+ or VOL- to change the to confirm.
EN • COLOR PLAY To activate light show (looped): • If either soothing sound or radio is playing when SLEEP is pressed, the unit will start counting down sleep timer and continue playing audio type. Slide COLOR switch to LOOP. To select duration: To stop light show at a particular color: • • Press PAUSE again to restart loop.
Do not clean the unit with abrasive or corrosive materials. DESCRIPTION • Do not tamper with the unit’s internal components. This invalidates the warranty. LxWxH 155 x 43 x 145 mm (6.1 x 1.7 x 5.7 in) • Only use fresh batteries. Do not mix new and old batteries. Weight 526 g (18.6 oz) without battery • FM 87.5 to 108 MHz Images shown in this manual may differ from the actual display. 4.
EN ABOUT OREGON SCIENTIFIC FCC STATEMENT Visit our website (www.oregonscientific.com) to learn more about Oregon Scientific products. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio / TV technician for help. not cause harmful interference. 2) This device must accept any interference received, including interference that may cause undesired operation. DECLARATION OF CONFORMITY The following information is not to be used as contact for support or sales. Please visit our website at www2. oregonscientific.com/service for all enquiries.
