International User Guide Cordless phone with integrated answering system Oricom M5200 Series

BASIC OPERATION

Basic Operation

During standby

Cordless handset's LCD display

HANDSET 1 : Handset number

: Current battery level

: A constant signal icon indicates the

cordless handset is linked to the base unit. When signal icon is

ﬂashing the handset needs to be re-registered (see page 25).

Answering an incoming call

With cordless handset

When there is an incoming call, the phone rings and

ﬂashes on the display. If a CID

record is received,

ﬂashes and the caller information is displayed. The auto answer

function allows you to answer a call by simply lifting the handset from the base when it

is ringing.

1. Press key to answer the call if hansdet is off the base.

2. Press key again to end the call.

HANDSET

Note: If the power is not connected to the base unit.

The cordless handset CANNOT operate.

With base unit

When there is an incoming call,

1. Press key to answer the call.

2. Press key again to end the call.