- Orion Owner manual Amplifier 4002, 6002
Single-Channel Bridged Configuration
● Lowest recommended impedance is 4W mono.
● Mono input must be used for this configuration. Only the Left input is used.
● Outputs can be configured for high-pass, low-pass, or full range operation.
● Outputs are configured for single-channel bridged operation which is ideal for
separate left or right channel subwoofer applications.
Tri-Mode Three-Channel Configuration
● Lowest recommended impedance is 2W stereo and 4W bridged mono.
● Stereo operation must be used.
● Outputs must be configured for full range operation.
● Output is configured stereo and summed bridged.
● Passive crossovers must be used on all components and frequencies must not overlap.
WARNING! Failure to observe these requirements may result in damage to the amplifier.
9
©2003 Directed Electronics, Inc.