- Orion Owner manual Amplifier 4002, 6002

SPECIFICATIONS
1. All channels driven, continuous 4W load 20Hz to 20kHz, < 0.05% THD, with input voltage
at 13.8VDC.
2. All channels driven, continuous 2W load 20Hz to 20kHz, < 0.1% THD, with input voltage at
13.8VDC.
Amplifier Section Orion 4002 Orion 6002
Power Output 4W Stereo (Watts)1 100 x 2 150 x 2
Power Output 2W Stereo (Watts)2 200 x 2 300 x 2
Power Output 4W Mono (Watts) 400 x 1 600 x 1
Distortion with all channels driven < 0.1% THD+N < 0.1% THD+N
at rated power (20Hz to 20kHz)
Frequency Response 20Hz to 20kHZ 20Hz to 20kHZ
±0.25dB ±0.25dB
Linear Bandwidth 10Hz to 50kHz ±3dB 10Hz to 50kHz ±3dB
Signal-to-Noise Ratio > 100dB > 100dB
at Rated Power
Damping Factor > 200 > 200
Slew Rate > 20V per usec > 20V per msec
Input Sensitivity 200mV to 5V 200mV to 5V
Input Impedance 40kW 40kW
Fuse Type (2) 20 Amp ATC (1) 60 Amp MAXI
Dimensions 18.4" x 10.5" x 2.3" 22.4" x 10.5" x 2.3"
Weight 11 lbs. 12.5 lbs.
Crossover Section
Low Pass Crossover Continuously Variable Continuously Variable
2nd Order 2nd Order
(12dB per octave) (12dB per octave)
Low Pass Frequency Range 20Hz to 3kHz 20Hz to 3kHz
High Pass Filter Continuously Variable Continuously Variable
2nd Order 2nd Order
(12dB per octave) (12dB per octave)
High Pass Frequency 20Hz to 3kHz 20Hz to 3kHz
INTELLi Bass 10dB boost 10dB boost
INTELLi Bass Center Frequency 45Hz 45Hz
4
©2003 Directed Electronics, Inc.