- Orion Owner manual Amplifier 4002, 6002

END PANEL LAYOUT

1. Power LED - when lit indicates that the amplifier is on.

2. Stereo/Mono Switch - configures the amplifier for one or two inputs.

3. Gain Control - continuously adjusts from 200mV to 5V for full power output.

4. Copy/Master Switch - Determines the output of the RCA outputs.

5. RCA Inputs - accepts RCA input from a source unit, preamplifier, or equalizer.

6. RCA Outputs - provides easy connection to additional amplifiers.

7. Low-Pass Crossover Switch - activates 2nd order low pass crossover.

8. Low-Pass Frequency Control - adjusts the frequency of the low-pass crossover.

9. High-Pass Crossover Switch - activates 2nd order high pass crossover.

10. High-Pass Frequency Control - adjusts the frequency of the high-pass crossover.

11. INTELLi Bass Control - continuously adjusts from 0 to 10dB of boost.

12. Speaker Connections - allow up to 12-gauge speaker wire.

13. (2) ATC Fuse - protects the amplifier from over current situations.

14. (1) MAXI Fuse - protects the amplifier from over current situations.

15. REM Remote Turn-on Input - turns on the amplifier when fed 12 V+.

16. Power Connections - allow up to four-gauge power and ground cables.