SDS

IDH number: 2136216
Product name: Loctite PL 400 All Weather
Page 3 of 7
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Employers should complete an assessment of all workplaces to determine the need for, and selection of, proper exposure
controls and protective equipment for each task performed.
Hazardous Component(s)
ACGIH TLV
OSHA PEL
AIHA WEEL
OTHER
Limestone
10 mg/m3 TWA Total
dust.
5 mg/m3 PEL
Respirable fraction.
15 mg/m3 PEL Total
dust.
None
None
Urea
None
None
10 mg/m3 TWA Total
particulate.
None
Kaolin
2 mg/m3 TWA
Respirable fraction.
5 mg/m3 PEL
Respirable fraction.
15 mg/m3 PEL Total
dust.
15 MPPCF TWA
Respirable fraction.
50 MPPCF TWA
Total dust.
5 mg/m3 TWA
Respirable fraction.
15 mg/m3 TWA Total
dust.
None
None
Ethylene glycol
25 ppm TWA Vapor
fraction
50 ppm STEL Vapor
fraction
10 mg/m3 STEL
Aerosol, inhalable.
None
None
None
Acetone
250 ppm TWA
500 ppm STEL
1,000 ppm (2,400
mg/m3) PEL
None
None
Quartz (SiO2), <1% respirable
0.025 mg/m3 TWA
Respirable fraction.
2.4 MPPCF TWA
Respirable.
0.1 mg/m3 TWA
Respirable.
0.05 mg/m3 TWA
(Respirable dust.)
(Respirable dust.)
0.025 mg/m3
OSHA_ACT
(Respirable dust.)
0.05 mg/m3 PEL
Respirable dust.
None
None
Engineering controls:
Use local ventilation if general ventilation is insufficient to maintain vapor
concentration below established exposure limits.
Respiratory protection:
Use NIOSH approved respirator if there is potential to exceed exposure
limit(s).
Eye/face protection:
Safety goggles or safety glasses with side shields.
Skin protection:
Use impermeable gloves and protective clothing as necessary to prevent skin
contact.
9. PHYSICAL AND CHEMICAL PROPERTIES
Physical state:
Liquid
Color:
Tan
Odor:
Acrylic
Odor threshold:
Not available.
pH:
8.5
Vapor pressure:
Not available.