Outback Power VFX Series Installation Manual

2
Welcome to the OutBack Power Systems FX Series Inverter/Charger System
The FX Series Inverter/Charger o ers a complete power conversion system—DC to AC, battery charging, and an
AC transfer switch—and can be used as a stand-alone or back-up application. It is designed for indoor or enclosed
locations.
OutBack Power Systems does everything possible to assure the components you purchase will function properly
and safely when installed as instructed according to local and national electrical codes (NEC). Please read all of
the following instructions and the instructions that come with any other OutBack components that make up your
power system. Further instructions on individual FX set-ups as well as systems assemblies are included with the
FLEXware manuals.
• The non-Mobile FX is ETL listed to UL1741 (Inverters, Converters, Controllers, and Interconnection System
Equipment for Use with Distributed Energy Resources).
• All Mobile FX Series Inverter/Chargers are ETL listed to UL 458.
The FX and VFX Series Inverter/Charger Installation Manual covers the following information:
• Safety
• FX parts, standard and optional
• Initial inspection of the component
• Preparing the mounting surface
• Fastening the FX to the mounting surface
• General electrical information
FX Series Inverter/Charger Models
Sealed Units (designed for harsher environments, but still require enclosed protection)
FX2012 T (12 VDC/2000 VA) • FX2012 MT (12 VDC/2000 VA) • GTFX2524 (24 VDC/2500 VA)
FX2524 T (24 VDC/2500 VA) • FX2524 MT (24 VDC/2500 VA) • GTFX3048 (48 VDC/3000 VA)
FX3048 T (48 VDC/3000 VA) • FX2532 MT (32 VDC/2500 VA) (MT= Mobile GT= Grid-Tie)
Vented Units (designed for protected environments)
VFX2812 (12 VDC/2800 VA) • VFX2812 M (12 VDC/2800 VA) • GVFX3524 (24VDC/3500 VA)
VFX3524 (24 VDC/3500VA) • VFX3524 M (24 VDC./3500 VA) • GVFX3648 (48 VDC/3600 VA)
VFX3648 (48 VDC/3600VA) • VFX3232 M (32 VDC/3200 VA)
Each model FX has a single phase output marked with this symbol:
Each inverter puts out a sine wave waveform marked with this symbol:
Parts Included
One FX Series Inverter/Charger
One “WARNING ELECTRICAL SHOCK” sticker to place on the exterior of the FX
One packet of silicone grease to protect CAT 5 cable connections
One installation manual
One programming manual
One Turbo Kit (sealed units)
One DC Wiring Cover or DCC (vented units)
•
•
•
•
•
•
•
•
•
•
•
•
•