Outback Power VFX Series Installation Manual

FX2012MT AC Max = 12AAC (Default = 10AAC) DC Max = 100ADC

FX2524MT AC Max = 14AAC (Default = 12AAC) DC Max = 55ADC

FX2532MT AC Max = 14AAC (Default = 12AAC) DC Max = 40ADC

FX3048T AC Max = 14AAC (Default = 12AAC) DC Max = 35ADC

VFX2812M AC Max = 16AAC (Default = 14AAC) DC Max = 125ADC

VFX3524M AC Max = 20AAC (Default = 18AAC) DC Max = 85ADC

VFX3232M AC Max = 20AAC (Default = 18AAC) DC Max = 60ADC

VFX3648 AC Max = 20AAC (Default = 18AAC) DC Max = 45ADC

AC INPUT FREQUENCY RANGE

NOTE:

If the AC input source is out of the range noted below, the FX will not connect or stay connected.

All FX Models 56 - 64 Hz

MAXIMUM AC OUTPUT CURRENT

This is the amount of surge current that the FX will quickly supply for a split second. Depending on the

size of the surge, the FX can be overloaded for a minimum time of 5 seconds to a maximum time of 30

minutes.

All 12 VDC FXs 56AAC per FX for 1 millisecond

All Other FXs 70AAC per FX for 1 millisecond

MAXIMUM CONTINUOUS OUTPUT POWER

An FX Series Inverter/Charger’s model number indicates its maximum continuous output power by

changing the last two digits to zeros. For instance, an FX2012MT has a maximum continuous output

power of 2000VA (volt-amps).

FX2012MT 2000VA (VA = volt-Amps)

FX2024MT 2000VA

FX2532MT 2500VA

FX2548T 2500VA

VFX2812M 2800VA

VFX3524M 3500VA

VFX3232M 3200VA

VFX3648 3600VA

MAXIMUM AND DEFAULT AC INPUT AND DC (bulk stage) OUTPUT VALUES