Product Manual

900-0161-01-01 Rev B 43
Metering
MATE3-Class System Display Screens
A MATE3-class system display can monitor the inverter and other networked devices. From the
Home screen, the <
Inverter
> “soft” key accesses the inverter monitoring screens.
Figure 7 Home Screen
Inverter Screens
The Inverter soft key opens a series of screens showing the inverter operating mode, battery
voltage, and status of several AC operations. The first screen displays AC information on the
inverter’s L1 input and output. The
<
Next
>
soft key proceeds to a screen that shows the same
information for L2. The
<
Port
>
soft key will select other networked inverters, if present.
Figure 8 Inverter Screens
Screen items:

The upper left corner is the
Inverter Mode
(see above). (If the selected inverter is a slave, only a few
modes are possible.) When
Charging
is indicated in this location, the
Charge Mode
(see above)
specifies the stage.

Invert
displays the kilowatts and AC amperage generated by the inverter. It may go to loads, or in a
grid-interactive system it may be sold back to the utility grid.
Inverter Soft Key
Inverter Modes:

Inverting
(see page 21)

Searching
(see page 23)

Support
(see page 13)

Sell
(see page 14)

Charging
(see
Bulk
on page 29)

Charger Off
(see pages 26, 28,
and 29)

Float
(see page 30)

EQ
(see page 32)

Silent
(see page 30)

PassThru
(see page 26)

Error
(see page 51)

Off
Charge Mode Inverter Mode
Charge Modes

BULK

FLOAT

EQ
Inverter Modes
(slave):

Slave On

Slave Off

Error