Product Manual

Introduction
900-0161-01-01 Rev B 9
Inverter Functions

Battery-to-AC inverting which delivers power to run backup loads and other functions
 Provides split-phase output
 Adjustable range of output voltage
 Settable nominal output frequency

AC-to-battery charging (OutBack systems are battery-based)
 Accepts a wide variety of AC sources
 Requires split-phase input

Uses battery energy stored from renewable resources
 Can utilize stored energy from many sources (PV arrays, wind turbines, etc.)
 OutBack FLEXmax charge controllers will optimize PV power production as part of a
Grid/Hybrid system

Dual AC inputs allow direct connection to utility grid and AC generator

Rapid transfer between AC source and inverter output with minimal delay time

Uses the MATE3™ class of System Display and Controller products, or the AXS Port™ SunSpec
Modbus Interface (sold separately) for user interface as part of a Grid/Hybrid system
 MATE3s system display is required for grid support functionality (see below)

Supports the OPTICS RE™ online tool
1
for a cloud-based remote monitoring and control application
 Requires the MATE3 or the AXS Port
 Visit www.outbackpower.com to download

Uses the HUB10.3™ Communications Manager for stacking as part of a Grid/Hybrid system
 Stackable in parallel configuration up to ten inverters

Certified by ETL to UL 1741 SA, CSA C22.2, and IEC 62109-1

Grid support functionality according to the requirements of UL 1741 SA

Field-upgradeable firmware (from www.outbackpower.com); requires MATE3 product or AXS Port
 The MATE3s system display must be used when upgrading the inverter to firmware revision
001.006.063 or higher.

Seven selectable input modes for different applications
 Generator
 Support
 Grid Tied
 UPS
 Backup
 Mini Grid
 GridZero
NOTE:
This product has a settable AC output range. In this book, many references to the output
refer to the entire range. However, some references are made to 120/240 Vac or 60 Hz
output. These are intended as examples only.
1
Outback Power Technologies Intuitive Control System for Renewable Energy