Manual

8 | P a g e
3. To properly install ignition system, a spark and ground wire
need to be attached to the igniter box.
 Your burner will arrive with three wires coming from
the underside of the burner assembly. The ORANGE
wire is used only for remote operated burner systems.
The remaining two wires can be plugged into the ports
on the back side of the sparker box in your control
panel.
 Test system by depressing the button on the igniter. A
continuous repeating spark between the igniter
electrode and spark-receiving probe means everything
is connected properly. Consult the troubleshooting
section of your crystal fire owner’s manual if spark is
weak, intermittent, or not present.
4. Once ignition system is grounded and gas
connections are secured and checked for
leaks, set the burner back into its original
position if it was removed during gas hookup.
Burner