Instructions / Assembly

13. On a flat surface, position Ladder Blocking (F)
where marked on Main Joist (D) and screw with
2 - 2 1/2” screws per piece. Blocking should be flush
with top and bottom of Main Joist with all notches
facing down.
F
D
D
14. Complete all 8 Ladder Sections on
the ground prior to moving to Step 15.
Completed Ladder Section
2 - 2 1/2”
screws
per side
Joist is pre-marked for
blocking placement.
15. Carefully lift up one of
the Ladder Sections between
Girders. You will require a
helper to assist in lifting
Ladder Sections.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [e-mail]
Page 8