Instructions / Assembly

Toll Free 1-888-658-1658 www .outdoorlivingtoday.com sales@out doorlivingtoday.com
Page 16
29. Make sure the Window Slides down into the
dado cut of the Top Cap.
Position remaining corner Polygal windows as shown
to the right. (3 outside Side Windows and 2 front Angle
Cut Windows.)
30. Position,attach and complete Horizontal Top Cap from Doorway/ Wall Framing Set -
Part I - 30” long. Cap will sit on Doorway Framing. Use 4 - 3” screws to secure. Attach from the
inside. Complete both front and rear Cap s.
Cap’s 2x4 has angle
cut ends at top.