Instructions / Assembly

Toll Free 1-888-658-1658 www .outdoorlivingtoday.com [e-mail]
Page 25
52. Slide Roof Window up dado cut and gap of Raf ters until it slides completely into dado cut of
Ridge Board.
Dado cut of Ridge Board
53. With Window in position, use 2 - 1 1/2” finishing nails to secure. Window should be slightly
recessed or flush from end of Raf ter and back approximately 1/4” from end of Out side Rafter.
Standing on ladder from inside the Greenhouse, caulk the Ridge Board / Window Seam.
Caulk seam
1 1/2” finishing nails
54. Install additional Roof Polygal Window as shown above following Steps 51-53.