Instructions / Assembly

Toll Free 1-888-658-1658 www .outdoorlivingtoday.com [e-mail]
Page 27
57. Locate and attach Part V - Inside Vent
Framing Support - 3/4” x 2 1/2” x 49” with
6 - 2” screws. Position parallel with Hinged
Window.
Inside Vent
Framing Support
58. Locate Heat Activated Hinge. Heat Activated Hinge will require a basic assembly. Follow
Manufacturer’s directions. Attach with Manufacturer’s Hardware supplied. Phillips Head Driver will be
required. To install, open Window from the inside. Hinged Window will be marked for correct location
for Hinge. Attach Hinge Flant to Framing Support and Window Frame as illustrated above.
Marked
Important- Heat Activated Hinge will open only after the Greenhouse reached an inside temperature of
approximately 75 degrees Fahrenheit. Make sure Hinged Windows open easily and do not stick. W e
recommend purchasing a thermometer once the Greenhouse is complete. Please monitor Heat Activated
Hinge to confirm it opens and is functioning correctly .
Lift Window
Open