Instructions / Assembly

B-3

HARDWARE NEEDED

Assembly: Requires 2 people. Tools Needed: Hammer, Phillips Head Screwdriver, Pliers,

and a 7/16” Nut Driver.

**NOTE: DO NOT fully tighten any bolts until instructed to do so. Tightening too

soon may prohibit parts from tting together. All hex nuts should be on the inside

of the grill unless stated otherwise. Unpack all contents in a well cleared and

padded area.**

Estimated Time: 45 minutes

Part No. Description Photo QTY

SHOULDER BOLT, 1/4-20 2

HEX BOLT 1/4-20 X 1/2” 4

HEX BOLT 1/4-20 X 3/4” 2

HEX BOLT 1/4-20 X 1 3/4” 12

HEX NUT, FLANGE, 1/4-20 14

LOCK WASHER, 1/4” 2

FLAT WASHER, 1/4” 4

FLAT WASHER, 2/5” 2

SMALL HAIR COTTER PIN, 1” 2

LARGE HAIR COTTER PIN, 1 1/2” 2

HUB CAP 2

Hardware Pack: #551168