Instructions / Assembly

ManualsBrandsOVE Decors ManualsBarn DoorsCooper 36 in. x 84 in. Sliding Barn Door in Textured Aged Wood with Victorian Soft Close Hardware Kit

PAGE 1

COOPER / CORNWALL / DORIAN / WESTBRIDGE

INSTALLATION MANUAL | MANUEL D’INSTALLATION | MANUAL DE INSTALACIÓN

www.ovedecors.com | customerservice@ovedecors.com

Questions, problems, need help?

Call our customer service department at

1-866-839-2888, 8 a.m. - 5 p.m., EST, Monday - Friday

Questions, problèmes ou besoin d’aide?

Contactez notre service à la clientèle au

1-866-839-2888, du lundi au vendredi de 8h00 à 17h00 HNE.

Preguntas, problemas o necesita ayuda?

Llame a nuestro departamento de servicio al cliente al

1-866-839-2888, 8 am. – 5 pm., HDE, Lunes a Viernes.

An installation video guide can be found on our Youtube channel:

Un guide d’installation video est disponible sur notre chaîne Youtube:

Una guía de instalación de vídeo está disponible en nuestro canal de Youtube:

https://tinyurl.com/y6g7obyf

THIS MANUAL IS FOR SINGLE DOOR INSTALLATION ONLY.

DO NOT USE THIS MANUAL IF YOU HAVE DOUBLE DOORS.

FOR DOUBLE DOORS, PLEASE USE THE DOUBLE DOOR MANUAL SUPPLIED IN THIS PACKAGE.

CE MANUEL EST DESTINÉ UNIQUEMENT À L’INSTALLATION D’UNE PORTE SIMPLE.

N’UTILISEZ PAS CE MANUEL SI VOUS AVEZ DES DOUBLES PORTES.

POUR LES DOUBLES PORTES, VEUILLEZ UTILISER LE MANUEL SUR LES DOUBLES PORTES FOURNI DANS CE DOSSIER.

ESTE MANUAL ES PARA LA INSTALACIÓN DE UNA SOLA PUERTA.

NO UTILICE ESTE MANUAL SI TIENE PUERTAS DOBLES.

PARA PUERTAS DOBLES, POR FAVOR USE EL MANUAL DE PUERTAS DOBLES INCLUIDO EN ESTE PAQUETE.

Summary of content (22 pages)

PAGE 1
COOPER / CORNWALL / DORIAN / WESTBRIDGE INSTALLATION MANUAL | MANUEL D’INSTALLATION | MANUAL DE INSTALACIÓN THIS MANUAL IS FOR SINGLE DOOR INSTALLATION ONLY. DO NOT USE THIS MANUAL IF YOU HAVE DOUBLE DOORS. FOR DOUBLE DOORS, PLEASE USE THE DOUBLE DOOR MANUAL SUPPLIED IN THIS PACKAGE. CE MANUEL EST DESTINÉ UNIQUEMENT À L’INSTALLATION D’UNE PORTE SIMPLE. N’UTILISEZ PAS CE MANUEL SI VOUS AVEZ DES DOUBLES PORTES.
PAGE 2
TABLE OF CONTENT TABLE DES MATIÈRES TABLA DE CONTENIDOS TABLE OF CONTENT......................................... 2 TABLE DES MATIÈRES...................................... 2 TABLA DE CONTENIDOS................................... 2 BARN DOOR DIMENSIONS ............................... 3 DIMENSIONS DU COUPE-FLUX........................ 3 PACKAGE CONTENT......................................... 4 CONTENU DE L’EMBALLAGE .......................... 4 DIMENSIONES DE LA PUERTA DEL ESTABLO ...................
PAGE 3
BARN DOOR DIMENSIONS DIMENSIONS DU COUPE-FLUX DIMENSIONES DE LA PUERTA DEL ESTABLO Measurements Mesures Medidas A Decorative board length Longueur du panneau décoratif Longitud del tablero decorativo B Support bar length Longueur de la barre de support Longitud de la barra de soporte C Distance between handle holes Distance entre les trous de poignée Distancia entre los orificios de la manija D Door height Hauteur de porte Altura de la puerta E Barn door height Hauteur du coupe-flux Altura de la pu
PAGE 4
PACKAGE CONTENT CONTENU DE L’EMBALLAGE CONTENIDO DEL PAQUETE J or E1 F G A1 or A2 or A3 E2 or J *Roller and stopper style will depend on option purchased and is packaged separately. *Le style des roulettes et du bouchon dépend de l’option achetée et est emballé séparément. A1 or A2 or A3 *El estilo del rodillo y el tapón dependerá de la opción adquirida y se empaqueta por separado.
PAGE 5
PACKAGE CONTENT CONTENU DE L’EMBALLAGE CONTENIDO DEL PAQUETE A1 or A2 or A3 x2 x2 x2 E1 and E2 J or 1x 1x 2x B1 or B2 or B3 or B4 C 1x C1 1x D 1x G 1x H 1+1 x1 x1 x1 x1 F 1x I 2x PAGE 5
PAGE 6
PART LIST LISTE DES PIÈCES LISTA DE PIEZAS PART # # DE PIÈCE PARTE # DESCRIPTION DESCRIPTION DESCRIPCIÓN QUANTITY QUANTITÉ CANTIDAD CODE CODE CÓDIO A1 Door roller (U-shape style option) (comes in separate box) Roue de la porte (option de style en U) (dans une boîte séparée) Rodillo de la puerta (opción de estilo en forma de U) (viene en una caja separada) 2 99DBD0003-JS A2 Door roller (victorian style option) (comes in separate box) Roue de la porte (option de style victorien) (dans une boîte sépar
PAGE 7
SUPPLIED HARDWARE LIST QUINCAILLERIE FOURNIE CONTENIDO DE HARDWARE AA Spacer Entretoise Espaciador 5x BB CC Lag bolt Boulon de butée Perno de retardo ST8x90mm 5x Bolt Boulon Perno M10x50mm 4x DD EE FF Screw Vis Tornillo ST4x25mm 2x Bolt Boulon Perno M8x55mm 2x Nut Écrou Tuerca 4x GG HH II JJ Washer Rondelle Arandela M10 8x Washer Rondelle Arandela M8 5x Screw Vis Tornillo ST4x15mm 6x Lag bolt Boulon de butée Perno de retardo ST3.5x50mm 8x Allen key Clé Allen Llave Allen 2.
PAGE 8
PREPARATION PRÉPARATION PREPARACIÓN This instruction is drawn up for a door opening from right to left (see illustration A). For an installation for a door opening from left to right (see illustration B), use the same instructions, but switch around the panels: mirror effect. Utilisez ces instructions pour une ouverture de la porte de droite à gauche (illustration A).
PAGE 9
SAFETY INFORMATION INFORMATION SUR LA SÉCURITÉ INFORMACIÓN DE SEGURIDAD CAUTION Please carefully read the following important safety information before handling or installing this barn door. There is a risk of serious injury while handling this product. To minimize these risks, please note: • Always wear safety gloves while handling. • Always read and follow all the steps in the installation instructions. • Inspect all contents for damage before installation.
PAGE 10
SAFETY NOTICE AVIS DE SÉCURITÉ AVISOS DE SEGURIDAD NOTICE Any modification or alteration from what is specified in this instruction manual will void any and all warranty on this product. The distributor is not responsible for any damage to the unit or personal property caused by improper installation. If you disregard instructional warnings, you will void your warranty. Consult the distributor’s website for any additional information or question on this product’s installation.
PAGE 11
SUPPORT BAR INSTALLATION INSTALLATION DE LA BARRE DE SUPPORT INSTALACIÓN DE LA BARRA DE SOPORTE 1 1.1 Measure and mark the position of the center for the decorative board (F) and the support bar (G) using the indicated dimensions. 1.2. Using a stud finder or equivalent tool, identify 4 studs around the center point and mark their positions on the wall.
PAGE 12
SUPPORT BAR INSTALLATION INSTALLATION DE LA BARRE DE SUPPORT INSTALACIÓN DE LA BARRA DE SOPORTE 2 2.1 Measure and mark the positions of the holes from center to sides as illustrated, making sure the holes are leveled. 2.2. Drill pilot holes in the marked locations with a ø3/16” (5mm) drill bit. 2.1 Mesurez et marquez les positions des trous du centre vers les côtés comme illustré, en vous assurant que les trous sont de niveau. 2.2.
PAGE 13
SOFT CLOSE MECHANISM INSTALLATION INSTALLATION DU MÉCANISME DE FERMETURE EN DOUCEUR INSTALACIÓN DEL MECANISMO DE CIERRE SUAVE 3 3.1-3.4. Install the 2 soft close mechanisms (H) onto the support bar (G) in the positions shown and fix them with the supplied bolts. 3.1-3.4. Installer les 2 mécanismes de soft close (H) sur la barre de support (G) dans les positions indiquées et les fixer avec les boulons fournis. 3.1-3.4.
PAGE 14
SOFT CLOSE MECHANISM INSTALLATION INSTALLATION DU MÉCANISME DE FERMETURE EN DOUCEUR INSTALACIÓN DEL MECANISMO DE CIERRE SUAVE 4 4.1-4.4. The soft close mechanism can be reset using a screwdriver. The correct installation starting position is to be adjusted toward the door closed side of the bar. Both to the left if the door closes to the left or both to the right if the door closes to the right. 4.1-4.4. Le mécanisme de fermeture en douceur peut être réinitialisé à l’aide d’un tournevis.
PAGE 15
DOOR INSTALLATION INSTALLATION DE LA PORTE INSTALACION DE LA PUERTA 5 5.1. Install the 2 door rollers (A) on the door (B) using bolts (CC), washers (GG) and nuts (FF). 5.2. Install the handle (C) and handle back plate (C1) onto the door (B) using bolt (EE). 5.1. Montez les 2 galets (A) sur la porte (B) à l’aide de boulons (CC), rondelles (GG) et écrous (FF). 5.2. Installez la poignée (C) et la plaque arrière de la poignée (C1) sur la porte (B) à l’aide des boulon (EE). 5.1.
PAGE 16
DOOR INSTALLATION INSTALLATION DE LA PORTE INSTALACION DE LA PUERTA 6 NOTE: Use step 6.1 for installation of stoppers (E1 & E2). Use step 6.2 for installation of stoppers (J). 6.1. Slide the 2 stoppers (E1 & E2) onto the support bar (G). 6.2. Loosely install the 2 stoppers (J) onto the support bar (G) 6.3. Place the spacers (AA) between the support bar (G) and the support board (F), install the support bar (G) and the support board (F) onto the wall using washers (HH) and lag bolts (BB).
PAGE 17
DOOR GUIDE INSTALLATION INSTALLATION DU GUIDE DE PORTE INSTALACIÓN DE LA GUÍA DE LA PUERTA 7 7.1. Place the door guide (D) at the bottom of the door (B), Slide the door (B) side to side to ensure the guide (D) is properly placed at a point that will always be under the door, then mark the position of the guide (D). 7.2-7.3. Mark the positions of the holes of the guide (D) on the floor, drill pilot holes in the marked locations with a ø5/64” (2mm) drill bit. 7.4. Install the guide (D) with the screws (DD).
PAGE 18
SOFT CLOSING ACTUATOR INSTALLATION INSTALLATION D’UN ACTIONNEUR DE FERMETURE EN DOUCEUR INSTALACIÓN DEL ACTUADOR DE CIERRE SUAVE 8 STOP HERE If you are installing your barn door with the rollers (A1 / A2), continue this installation at step#1 If you are installing your barn door with the rollers (A3), continue next page. 8.1-8.4.
PAGE 19
SOFT CLOSING ACTUATOR INSTALLATION INSTALLATION D’UN ACTIONNEUR DE FERMETURE EN DOUCEUR INSTALACIÓN DEL ACTUADOR DE CIERRE SUAVE 9 9.1-9.4. With the door in the fully closed and open positions, place the soft closing actuators (I) at the top of the door (B) at the center of the soft close mechanisms (H) as shown, then fix in place with screws (II). 9.1-9.4.
PAGE 20
SOFT CLOSING ACTUATOR INSTALLATION INSTALLATION D’UN ACTIONNEUR DE FERMETURE EN DOUCEUR INSTALACIÓN DEL ACTUADOR DE CIERRE SUAVE 10 NOTE: Use step 10.1 & 10.3 for installation of stoppers (E1 & E2). Use step 10.2 & 10.4 for installation of stoppers (J). 10.1-10.2. With the door positioned at the close and open stop points, position each of the 2 roller stoppers (E) in order to stop the door (B) when opening it or closing it, mark the positions of the stoppers. 10.3-10.4.
PAGE 21
MAINTENANCE AND CARE ENTRETIEN ET MAINTENANCE MANTENIMIENTO Y CUIDADO For the daily maintenance, use a wet cloth and a soft liquid cleaner. Never use abrasive cleaners containing some acetone, chlorine or strong bleach, scrapers, metallic brushes, nor other objects or the products which can graze or tarnish surfaces. Use a ratchet to strongly tighten any bolts used to support the door. Check these bolts every 4 months and re-tighten them if necessary.
PAGE 22
WARRANTY NOT VALID IN MEXICO CONSUMER RESPONSIBILITIES The DISTRIBUTOR’s products will remain beautiful for many years if you properly care for them. The DISTRIBUTOR does not recommend the use of harsh abrasive cleansers on any of its products. Harsh cleansers will damage the finish of your product. MAINTENANCE RR RR For daily maintenance, use a wet cloth and a soft liquid cleaner.