SAGA / YOSEMITE / 735H / VIRTUOSO INSTALLATION MANUAL | MANUEL D’INSTALLATION | MANUAL DE INSTALACIÓN Flush | Chasse | Descarga 1.28 gal | 4.
TABLE OF CONTENT TABLE DES MATIÈRES TABLA DE CONTENIDOS TABLE OF CONTENT.........................................2 TABLE DES MATIÈRES......................................2 TABLA DE CONTENIDOS...................................2 SAFETY INFORMATION.....................................3 INFORMATION SUR LA SÉCURITÉ...................3 INFORMACIÓN DE SEGURIDAD.......................3 POWER OUTLET.................................................4 PRISE DE COURANT..........................................
SAFETY INFORMATION INFORMATION SUR LA SÉCURITÉ INFORMACIÓN DE SEGURIDAD CAUTION 1. Do not disassemble toilet by yourself. 2. Ensure that there is proper air flow in the room to avoid humidity buildups. 3. Ensure that the product is set more than 0.6 meter away from the bathtub. 4. Ensure electric power is AC 120V. 5. Ensure the electrical socket can bare a load of 1800W power (or else it can cause fire or electrical shock). 6. Ensure the electrical source is well grounded. 7.
SAFETY INFORMATION INFORMATION SUR LA SÉCURITÉ INFORMACIÓN DE SEGURIDAD CAUTION 10. Keep any flame or flammable products away from the toilet. 11. Do not step on the toilet seat, the seat cover, the ceramic body, or put anything heavy on the product. Otherwise, the product may break and may cause injury or the product may break and may cause indoor flooding. 12. Do not put your finger or anything else into the outlet of the drying blower. 13.
PART LIST LISTE DES PIÈCES LISTA DE PIEZAS A C J I H F D E G O M N L P K TOOLS REQUIRED (not supplied) OUTILS REQUIS (non fournis) HERRAMIENTAS NECESARIAS (no incluido) PAGE 5
PART LIST LISTE DES PIÈCES LISTA DE PIEZAS PART # # DE PIÈCE PARTE # DESCRIPTION DESCRIPTION DESCRIPCIÓN QUANTITY QUANTITÉ CANTIDAD CODE CODE CÓDIO A Complete Smart Seat Siège intelligent complet Asiento inteligente completo 1 99TOI0272-OU C Control keypad Clavier de contrôle Teclado de control 1 WHITE : 99TOI0269-OU GREY : 99TOI0421-OU D Shut-off Valve (1/2” to 3/8” Compresion) (Not supplied) Vanne d’arrêt (1/2” à 3/8” Compression) (Non fournis) Válvula de cierre (1/2” a 3/8” Compression) (No
1 INSTALLATION INSTALLATION INSTALACIÓN 1.1- Remove the seat from the ceramic base. Simply pull the seat up gently. 1.2- Install the toilet flange according to the manufacturer’s recommendations. 1.3- Position correctly the two fixing bolts of the toilet flange. Follow manufacturer’s recommendations. 1.4- Insert the wax ring gasket under the toilet. 1.1- Retirez le siège de la base en céramique simplement en le tirant vers le haut avec beaucoup d’attention 1.
2 INSTALLATION INSTALLATION INSTALACIÓN 2.1- Position the toilet on the flange, making sure the fixing bolts are aligned with the toilet’s holes. 2.2- Using a ratchet, reach behind the toilet and tightly screw the nut to the fixing bolts. 2.3- With care, re-install the seat on the ceramic base. 2.4- Pull-out the snap ring from the connector. Connect the filter’s flex-tube to the toilet’s water outlet and re-insert the snap ring. 2.
INSTALLATION INSTALLATION INSTALACIÓN 3 3.1- Connect the shut-off valve to the existing the water supply pipe. 3.2- Connect the supply line to the water inlet of the toilet. 3.3- Connect the supply line to the shut-off valve. 3.4- Ensure that the ball valve at the back of the toilet is open. Open the shut-off valve and check for leaks. 3.1- Raccorder le robinet d’arrêt à la conduite d’eau existante. 3.2- Connectez le tuyau flexible à l’entrée d’eau de la toilette. 3.
4 INSTALLATION INSTALLATION INSTALACIÓN 4- Apply silicone around the base of the toilet. Wait for 24h for it to dry. 4- Appliquez du silicone tout autour de la base de la toilette. Laissez sécher pendant 24h. 4- Aplique silicona alrededor de la base del inodoro. Espere 24h para que se seque.
BATTERY USAGE SAFETY GUIDELINES CONSIGNES DE SÉCURITÉ POUR L’UTILISATION DE LA BATTERIE PAUTAS DE SEGURIDAD PARA EL USO DE LA BATERÍA • • • • • • • Always purchase the correct size and grade of battery most suitable for the intended use. Clean the battery contacts and also those of the device prior to battery installation. Remove batteries from equipment which is not to be used for an extended period of time. Remove batteries if consumed or if product is to be left unused for a long time.
FIRST TIME USE GUIDELINES DIRECTIVES D’UTILISATION POUR LA PREMIÈRE FOIS PAUTAS PARA EL USO POR PRIMERA VEZ 6 6.1- Open the water supply inlet valve. 6.2- Plug the toilet in the power socket. 6.3- The toilet’s blue light will start blinking. The blinking light indicates that the wash tank is filling with water, a sensor in the toilet will stop the filling process automatically after around 3 minutes when the tank is full of water.
REMOTE CONTROL PAIRING COUPLAGE À DISTANCE EMPAREJAMIENTO DEL MANDO A DISTANCIA 7 NOTICE: To ensure good function, the remote has to be paired to the toilet after the first start-up. 7.1- Plug the toilet in the power socket. 7.2- Press any of the buttons on the remote in 10 seconds. The toilet will beep and the pairing is now completed. REMARQUE : Pour assurer un bon fonctionnement, la télécommande doit être appairée à la toilette après la première mise en marche. 7.
8 SIDE KEYPAD CONTROLS DESCRIPTION DESCRIPTION DES COMMANDES DU CLAVIER LATÉRAL DESCRIPCIÓN DE LOS CONTROLES DEL TECLADO LATERAL POWER: Press 1 time, it will turn the toilet ON. Press 2 times, it will turn the toilet OFF. EN MARCHE: Appuyer 1 fois, la toilette se met en marche. Appuyer 2 fois, la toilette s’arrête. ENCENDIDO: Presione 1 vez, se encenderá el inodoro. Presione 2 veces, se apagará el inodoro.
9 SIDE KEYPAD CONTROLS DESCRIPTION DESCRIPTION DES COMMANDES DU CLAVIER LATÉRAL DESCRIPCIÓN DE LOS CONTROLES DEL TECLADO LATERAL REAR BIDET / MOVE & MANUAL NOZZLE WASH: Pressing this button will initiate the Static Rear Bidet Cleaning function. Press it again to change to the Back-&-Forth Rear Bidet Cleaning function. *The REAR BIDET refers the 1 water jet function of the nozzle.
11 LIGHT INDICATOR PANEL DESCRIPTION DESCRIPTION DU PANNEAU INDICATEUR LUMINEUX DESCRIPCIÓN DEL PANEL INDICADOR DE LUZ NOZZLE WASHING indicator: The light will turn GREEN when the nozzle washing is active. The light will turn off when the nozzle washing is not active. Indicateur de LAVAGE DES BUSES: Le voyant devient VERT lorsque le lavage de la buse est actif. La lumière s’éteint lorsque le lavage de la buse n’est pas actif.
12 REMOTE CONTROL DESCRIPTION DESCRIPTION DE LA TÉLÉCOMMANDE DESCRIPCIÓN DEL MANDO A DISTANCIA REAR BIDET / MOVE: Pressing this button will initiate the Static Rear Bidet Cleaning function. Press it again to change to the Back-&-Forth Rear Bidet Cleaning function. *The REAR BIDET refers the 1 water jet function of the nozzle. BIDET ARRIÈRE / DÉPLACEMENT: En appuyant sur ce bouton, la fonction de nettoyage statique du Bidet Arrière est activée.
13 REMOTE CONTROL DESCRIPTION DESCRIPTION DE LA TÉLÉCOMMANDE DESCRIPCIÓN DEL MANDO A DISTANCIA WATER PRESSURE DOWN: Pressing this button during the Static or the Back-&-Forth Bidet cleaning will decrease the water jet pressure. 5 settings: 5 increments from high to low. PRESSION DE L’EAU EN BAISSE: Appuyez sur ce bouton pendant le nettoyage Statique ou Back-&-Forth Bidet pour diminuer la pression du jet d’eau. 5 réglages: 5 incréments d’élevé à faible.
14 REMOTE CONTROL DESCRIPTION DESCRIPTION DE LA TÉLÉCOMMANDE DESCRIPCIÓN DEL MANDO A DISTANCIA AIR TEMPERATURE BUTTON & INDICATOR: Pressing this button will cycle through the 4 possible temperatures settings for the air drying function. LIGHT OFF = Room temp / GREEN = Low / ORANGE = Medium / RED = High BOUTON ET INDICATEUR DE TEMPÉRATURE DE L’AIR : En appuyant sur ce bouton, vous obtenez 4 réglages de températures possible pour la fonction SÉCHAGE.
15 AUDIO SIGNALS SIGNAUX AUDIO SEÑALES DE AUDIO BEEPING SOUNDS DIRECTIONS 1X BEEP = The toilet will give out one beeping sound every time it successfully receives a command from the Remote Control. 2x BEEP = The toilet will give out two beeping sounds every time it has successfully received a command, but cannot execute it. The toilet might not be able to execute a given commant because the function is currently unavailable, or because a given function has reached its maximum or minimum setting.
FEATURES CARACTÉRISTIQUES CARACTERÍSTICAS 16 REAR BIDET CLEANING (1 WATER JET) This function will only work if the user is sitting on the toilet. Press the REAR BIDET/MOVE button for a rear bidet cleaning. Water will spray and clean the user. Press the button again and the nozzle will move back & forth to insure the cleanest result. You can use this key to get the best cleaning effect. NETTOYAGE DU BIDET ARRIÈRE (1 JET D’EAU) Cette fonction se mettra en marche seulement une fois l’utilisateur assis.
17 FEATURES CARACTÉRISTIQUES CARACTERÍSTICAS AIR DRYING This function will only work if the user is sitting on the toilet. Press the DRYING button for air drying. The air will dry the user. SÉCHAGE À AIR CHAUD Cette fonction se met en marche uniquement lorsque l’usager est assis. Appuyez sur le bouton SÉCHAGE et la séance séchage à air chaud débutera. SECADO POR AIRE Esta función operará únicamente si el usuario está sentado sobre el inodoro. Presione el botón SECADO para secado por aire.
19 CLEANING THE FILTER NETTOYAGE DU FILTRE LIMPIEZA DEL FILTRO 19.1- Close water inlet valve on your wall, and the ball valve at the back of the toilet. Unscrew the supply line and the 7/8” adapter at the back of the toilet. 19.2- The water filter is located inside the 7/8” adapter. Gently remove it and gently brush it with a toothbrush to remove any residue. Place the filter back inside the adapter. 19.3- Reconnect the 7/8” adapter and the water supply line to the toilet’s water inlet.
LONG TERM STORAGE ENTREPOSAGE À LONG TERME ALMACENAMIENTO PROLONGADO 20 NOTICE: When leaving for a long time without using this toilet, ensure to drain all the water from the toilet. 20.1- Close shut-off valve. 20.2- Unscrew the water drain plug. 20.3- After draining all of the water, tightly screw the water drain plug back into place.. 20.
SPECIFICATION SHEET FEUILLE DE SPÉCIFICATIONS GARANTÍA LIMITADA DEL PRODUCTO Item Electric Load Electric Cord Cleaning System Rear Bidet (1 jet) Lady Bidet (5 jets) Water Temp Heater Capacity Bidet Tank Capacity Overheating Safety Anti-Reflux Drying System Drying Air Temp Air Speed Heater Capacity Overheating Safety Heating Seat Seat Temp Heater Capacity Overheating Safety Deodorization System Deodorizer Limitations Water Supply Pressure Water Supply Temp Ambiant Temp Content AC 120V / 1300W / 60HZ 1.
INSTALLATION PICTURE IMAGE DE MONTAGE IMAGEN DE INSTALACIÓN PAGE 26
MAINTENANCE AND CARE For general cleaning, use mild, nonabrasive soap and warm water. Do not use abrasive cleaners (such cleaners contain sand or silica that will scratch the ceramic finish). Common bowl cleaners may be used on the ceramic surface. Do not use “in-tank” bowl cleaners because they contain corrosive chemicals that attack the tank’s components.
ENTRETIEN ET NETTOYAGE Pour le nettoyage général, utiliser un savon doux, non abrasif et de l’eau tiède. Ne pas utiliser de nettoyants abrasifs (tels les nettoyants contenant du sable ou de la silice qui rayeront la surface en porcelaine). Les nettoyants de toilette ordinaires peuvent être utilisés sur la surface de la cuvette en porcelaine. Ne pas utiliser de nettoyants placés à l’intérieur du réservoir, car ils peuvent contenir des produits chimiques agressifs qui attaquent les composants du réservoir.
MANTENIMIENTO Y CUIDADO Para limpieza general, utilice un detergente suave no abrasivo y agua tibia. No utilice limpiadores abrasivos (esos limpiadores contienen arena y sílice que rayarán el acabado de cerámica). Los limpiadores corrientes de taza de baño pueden ser usados en la taza de baño. No utilice limpiadores de taza colocados “dentro del tanque” porque contienen químicos corrosivos que atacan los componentes del tanque.
