Installation Guide

p. 4
INSTALLATION / INSTALACIÓN
1. Pass the electrical wires of the lamp through the mounting plate (A). Connect the lamp’s neutral and live
wires to your own, using the twist-cap connectors (EE). Fix the lamp’s grounding wire to the mounting plate (A)
by wrapping it around the bolt, and then tightening the bolt. Connect the lamp’s grounding wire to your main
grounding wire with a twist-cap connector (EE). Safely stuff the wires inside your outlet box.
1. Passezleslsélectriquesdelalampeaucentredelaplaquedemontage(A).Connectezlelsoustensionet
lelneutredelalampeàvoslsenutilisantlescapuchonsdeconnexiondévissables(EE).Fixezleldemiseà
laterredelalampeàlaplaquedemontage(A)enl’enroulantautourduboulonetensuiteserrerbienleboulon.
Connectezleldemiseàlaterredelalampeàvotrepropreldemiseàlaterreenutilisantlecapuchonde
connexiondévissable(EE).Soigneusement,insérezleslsdanslaboîtedesortie.
1. Pasar los cables eléctricos de la lámpara a través de la placa de montaje (A). Conecte el cable neutro y el
cable conductor a su cuenta usando los conectores con cabeza de rosca (EE). Sujete el polo a tierra de la
lámpara a la placa de montaje (A) envolviéndolo alrededor del perno y apriete bien el perno. Conecte el polo a
tierra de la lámpara a su polo a tierra con el conector con cabeza de rosca (EE). Cuidadosamente coloque los
cables en el interior de la caja de salida.
2. Install the mounting plate (A) to your outlet box with washers (BB), screws (CC / DD) and nuts (AA).
2. Installezlaplaquedemontage(A)àvotreboîtedesortieaveclesrondelles(BB),lesvis(CC/DD)etles
écrous (AA).
2. Instale la placa de montaje (A) a la caja de salida con las arandelas (BB), los tornillos (CC / DD) y las tuercas
(AA).
3. Install the back plate (B) to the mounting plate (A) with provided bolts. Strongly tighten the bolts. Push the
fastener to adjust the length of the line.
3. Installezlaplaquearrière(B)àlaplaquedemontage(A)aveclesboulonsfournis.Serrerfermementles
boulons.Poussezsurl’attacheand’ajusterlalongueurdesls.
3. Instalar la placa posterior (B) a la placa de montaje (A) con los pernos suministradas. Apretar fuertemente las
pernos. Empuje el sujetador para ajustar la longitud de la línea.