User's Manual
The Setup Program
- 29 -
♦ FUDUP(Full Duplex) Indicator
This indicator turns ON to indicate in Full-duplex mode; otherwise, it is OFF.
The NIC supports full duplex at 10BASE-T and 100BASE-TX. If the Switch hub supports
the NWay feature and full duplex, the LFE-8139ATX NIC automatically runs in full
duplex.
♦ 10/100(Link) Indicator
This indicator turn ON under two conditions: a good connection has been established with
a fast link pulse is detected on the UTP port and the adapter is running the network driver.
If there is a problem with the connection. Check the network cable for continuity and cuts.
If that does not resolve the problem, try replacing the cable.
♦ PWR Indicator
This indicator light indicates the power of the adapter is receiving.
♦ Tx/ Rx (Transmit /Receive) Indicator
This indicator flashes to indicate there is network activity -- the adapter is transmission or
reception data from the network.