Warranty
9
Operating Instructions
How to Empty The Dump Cart - Side Dump Function:
1. Always ensure the dump area and Dump Cart are clear of obstructions
and personnel during the dumping process.
2. Face the bed latch handle in the same direction as proposed dump area.
3. Release the bed latch by applying downward pressure on the bed with
one hand, while moving the bed latch handle toward the tow vehicle
until the bed releases from the tow bar.
4. Once the bed latch releases, use both hands to maintain control and
rotate the bed towards the dump area.
5. Slowly dump-out bed contents.
Bed Latch:
1. Travel with the bed in the latched position. Always secure the bed onto
the Cart frame before moving the Cart.
2. After unloading bed contents; inspect the area under the bed and
around the Cart frame area, remove any obstructions.
3. With two hands, rotate the bed to center on the Cart.
4. With two hands, grip the top edge of the bed and with constant
downward force, push the bed down until it latches to tow-bar.
Maintenance:
• Check and lubricate wheel hubs as needed. Grease ttings are located
on each wheel hub.
• If rust becomes apparent, sand lightly and touch-up with enamel paint.
• Check all welds. If a cracked weld is found, do not operate the Cart until
the damage is repaired by qualied personnel.
• Check and tighten any loose bolts.
• Check tire pressure regularly. Proper ination prolongs tire life. Refer to
the tire sidewall for manufacturer’s ination recommendation.