Operation Manual

To select the individual menu items, use the cursor buttons (menu navigation but-

tons) and conﬁ rm with OK as usual. All search functions and the required settings

are controlled via the Oyster / CARO / Cosmo HDTV … menu.

To enhance your operating convenience, many functions are performed automati-

cally.

For example, the antenna is automatically opened and moved into the previous

reception position any time you switch on the system. If no image is received in this

position, the automatic search function is started. Ensure that the moving antenna

cannot cause harm to any person before switching on the system.

When the system is switched off using the red stand-by button or the buttons of

the sat-mouse, the antenna retracts automatically. The antenna also retracts when

switching on the vehicle ignition to start the engine. Of course, the antenna will

need a few seconds to retract. Never drive off before the antenna is fully retracted

and the receiver has been switched off.

Before driving off, always perform a visual check of the vehicle roof to

ensure that the antenna is correctly retracted into its park position.

The display must show the green stand-by dot or must be completely

blank, depending on the settings.

Please note that the system is completely disconnected from the

vehicle‘s electrical system and that the antenna will hence not be able

to retract automatically when the master switch is switched off.

The receiver can be switched back from the power-saving stand-by mode only by

pressing both buttons of the sat-mouse simultaneously.

If you suspect a malfunction of your system, then ﬁ rst press both buttons of the

sat-mouse.

3.1 Functions of the satellite system