Operation Manual

13
Selecting this menu item will directly
start the automatic search. Otherwise,
the automatic search will start when
switching the system on if no signals
are received in the last reception po-
sition, e. g. after the vehicle has been
moved.
The satellite search is carried out in accordance with the ‚Last Elevation Memory‘
(LEM) principle starting at the angle of the last receiving position. The receivable
satellite is usually found quite quickly if the distance between old and new location
is not too great.
However, if a larger distance has been covered, it is generally advisable to select
option Search via location.
The automatic search function always assumes that your vehicle is perfectly level. If
this is not the case, the search time may be extended.
The satellite used for the automatic search can be pre-set under Oyster / CARO
/ Cosmo HDTV... -> Edit Settings -> Search satellite.
Ihre Sat-Anlage ist in der Lage, automatisch zwischen allen an Ihrem Standort emp-
fangbaren Satelliten hin und her zu schalten, ohne dass Sie dies besonders veranlas-
sen müssen.
Your satellite system will switch between all satellites receivable at your location
without any user interaction.
The satellites broadcasting the programme are stored together with the program-
me position in the channel list (see appendix ‚Channel list‘). If the satellite system
recognizes a satellite change after you have changed the channel, the antenna will
immediately search for this satellite and precisely adjust itself to its signal. During
this period, the status message Antenna is being moved is displayed.
3.2 Automatic search
Oyster HDTV > Automatic search
Satellite:
The mentioned satellite is being searched. Please be patient
for some seconds. If you want to abort, press EXIT.
State:
Astra 1
search active