Operation Manual

Menu item „Search via location“
opens a sub-menu with a selection of
countries and regions. Use the cursor
buttons (menu navigation buttons up/
down) to select an entry and confi rm
with OK to active it.
The system will then search for the
satellite used for the automatic search
which can be pre-set under Oyster /
CARO / Cosmo HDTV... -> Edit Settings
-> Search satellite.
The regionally applicable elevations
are now allocated to the receivable
satellites.
Finding a satellite may now be quicker.
This search option is especially con-
venient if you have travelled a greater
distance from your last location.
The satellite actually used for the
search will be shown on screen. After
the satellite has been found, the
system automatically switches to a
programme that is transmitted via this
satellite.
Please note that not all satellites and
all programmes can be received in all
locations. Reception also depends on
the size of the antenna.
3.3 Search via location
15
Search via location
MENU : Back
Germany (North)
Germany (South)
Austria
Switzerland
Netherlands
Belgium
Danmark
Poland
Czech Republic
Frace (North)
Frace (South)
England
...