Operation Manual

This menu contains several settings for the operation of the satellite system. Here,

all settings concerning the automatic search are made. Settings concerning general

functions of the receiver are made in Menu -> Edit settings.

The following settings of your satellite system can be edited:

 Stand-by mode

When the system is set to „Convenient“, it can be re-activated from stand-by

mode by pressing the red button on the remote control. The stand-by mode is

indicated by a green dot or hyphen in the satellite-mouse display.

When the system is set to „Energy Save“, the remote-control receiver

and the green dot are switched off when the system is in stand-by mode.

In this case, the system cannot be switched back on with the remote

control. To switch the system back on, press both buttons of the sat-mouse

(LED display) simultaneously.

 LED display upside down

If set to „Yes“, the channel number will be displayed bottom-up. This is useful

if the sat-mouse is mounted upside down. Channel numbers are then seen in

their normal position.

Setting „No“ must be used when the sat-mouse is mounted in „normal“

direction.

3.7 Edit settings