Operation Manual

21
 Sleeptimer
When in stand-by mode, the antenna will be retracted and switched off when
the sleep-timer is activated. When set to sleep mode, the system is switched
into the sleep mode by the sleep timer without retracting the antenna.
The regular timer programmes are only executed in sleep mode and are inactive
in stand-by mode.
 Reinitialise search parameters
Select this menu item and confi rm it with OK if you assume that your satellite
system does no longer reliably fi nd the selected satellite via the automatic
search or the search via location. The satellite search function is reset to the
default settings. Please note that the fi rst search after a parameter reset may
take quite a long time. This function should hence only be used after due
consideration.
Service menu
Select menu item Oyster / CARO / Cosmo HDTV… -> Edit settings and press the
ANT button to open the Service menu.
Sat-mouse characters
The default setting for the number of characters shown by the sat-mouse is 4.
Search transponder / beam (to be used by specialist dealers only)
Some satellites have more than one footprint. As a consequence, not all channels
of a satellite can be received within the satellite‘s overall coverage area. Also, it
may be possible that the automatic search will not yield a satellite when a different
footprint is selected for reference. With this menu item, a footprint suitable for your
location can be allocated to each satellite in accordance with the specifi cations of
the satellite operator.
3.7 Edit settings