Operation Manual

1.2 Proper use and operation
Your satellite receiver has been designed for use on mobile homes, camper trai-
lers or other vehicles for the reception of standard satellite signals of the Ku band
frequency range.
It is designed to automatically aim an antenna mounted on a stationary vehicle at
one of the geostationary and directly transmitting television satellites commonly
used to cover Europe.
The power to the system is supplied by a vehicle electric system with a rated volta-
ge of 12 or 24 Volt. For installations where a connection to the vehicle‘s electrical
system is not possible, a suitable 230-Volt-to-12-Volt power transformer must be
used.
This product has been designed for use in a fi xed installation on mobile
homes or camper trailers with a maximum speed of 130 km/h.
To ensure the reliable and proper operation of your system, it must not be used for
any other than its intended purpose.
 Changing the overall device by removing or adding individual components is
not permissible.
 All applicable and approved guidelines of the automotive industry must be
observed and complied with when installing the device. The installation
instructions supplied with the system must be strictly observed when
installing the pole and the antenna.
 The product does not require any regular maintenance. Enclosures must not
be opened.
 Do not clean your mobile home with the mounted satellite system in a
single-bay or drive-through car wash and do not use a high-pressure cleaner.
 Retract the antenna during periods of strong winds or storm.
 The equipment must only be installed on hard vehicle roofs which are
suffi ciently strong and inherently stable.
 In the event of any problems, or if you are unsure about anything, please
contact the manufacturer directly or a specialist workshop which is approved
by the manufacturer.
ten Haaft GmbH
Oberer Strietweg 8
.
DE-75245 Neulingen
Phone [phone]
.
Fax [phone]
[e-mail]
.
www.ten-haaft.com
5