Product Manual
Warnings
Failure to read and comply with the following warnings may result in a hazardous situation that
could lead to death, serious injury, or property damage.
Do Not operate the hoist with anything other than manual hand power.
Do Not use lever hoist with extension on lever handle.
Do Not operate if hook latch is missing or not functioning properly.
Do Not lift more than the rated load.
Do Not operate the product when it is restricted from forming a straight line with the direction of loading.
Do Not operate with twisted, kinked, or damaged chain.
Do Not operate if chain is not seated in sheaves or sprockets.
Do Not wrap chain around load or use chain as a sling.
Do Not operate until load chain is seated correctly in the load sheave.
Do Not operate unless load is properly applied to the saddle or bowl of the hook.
Do Not operate if load is applied to the tip of the hook or if hook is capsized.
Do Not lift people.
Do Not lift loads over people.
Do Not operate beyond load chain’s travel limits.
Do Not operate with side pulling or side loading of load to hoist.
Do Not operate a damaged or malfunctioning product.
Do Not remove, deface, or obscure warning labels.
Do Not leave a suspended load unattended, unless specic precautions are instituted.
Do Not lengthen chain or repair damaged load chain by welding.
Do Not use chain as an electrical or welding ground.
Do Not operate until personnel are warned of approaching loads and are cleared from the area.
EN pg.6