Product Manual

Important Information
and Precautions
The information in this manual should be used only for the Push Beam Trolley. This manual contains
general instructions dealing with the normal installation, operation, and maintenance of the product
described herein. The information provided should not be expected to prepare the user for all possible
circumstances.
This product should not be installed, operated, or maintained by any person who has not read all
the contents of these instructions. Failure to read and comply with these instructions, warnings, or
limitations noted might result in bodily injury, death, or property damage. Contact the distributor for
further explanation if information is not fully understood.
It is the responsibility of the owner/user to install, test, maintain, and operate these products in
accordance with OSHA, regulations, other federal, state, and local regulations.
Only trained and qualied personnel shall operate and maintain this equipment.
Maintain Records
Schedule and maintain records of regular inspection and maintenance of the product. Record your
Push Beam Trolley serial number and purchase date on the front cover of this manual to allow for
easier referencing.
Precautions
Do not use the Push Beam Trolley in conjunction with other equipment unless the system
designer,manufacturer, installer, or user has put the necessary safety devices in place. Modications
to upgrade or alter these products should only be authorized by the original manufacturer.
The Push Beam Trolley should be used for holding loads only within load ratings.
These Push Beam Trolleys meet or exceed ASME standards
(For use with manual or powered hoists)
Warnings
Failure to read and comply with the following warnings may result in a hazardous
situation that could lead to death, serious injury, or property damage. Be sure to
properly install, operate, and maintain the Push Beam Trolley so that it does not
come off the beam.
Do Not lift more than the designated load range.
Do Not lift people or lift loads over people.
Do Not operate a damaged or malfunctioning product.
Do Not remove, deface, or cover warning labels.
Do Not operate until personnel are warned and cleared from the area.
Do Not use if load is not suspended vertically.
Do Not use beam trolley as welding ground.
Do Not weld on the lifted load.
Do Not use beam trolleys in corrosive environments.
Do Not allow the load to swing.
Do Not use for any function other than that for which the product is designed.
EN pg.4