Product Manual

EN pg.5
Warnings
Failure to read and comply with the following warnings may result in a hazardous situation that
could lead to death, serious injury, or property damage. Be sure to properly install, operate, and
maintain the Beam Clamp so that it does not come off the beam.
Do Not lift more than the designated load range.
Do Not lift people or lift loads over people.
Do Not operate a damaged or malfunctioning product.
Do Not remove, deface, or cover warning labels.
Do Not operate until personnel are warned and cleared from the area.
Do Not use if load is not suspended vertically.
Do Not use beam clamp without locking rmly in place.
Do Not use beam clamp as welding ground.
Do Not use the beam clamp for a buffer or grab.
Do Not add lengthening pieces to the beam clamp lever.
Do Not weld on the lifted load.
Do Not open the beam clamp when it is holding a load.
Do Not use beam clamps in corrosive environments.
Do Not use connections between the clamp and load.
Do Not allow the load to swing.