OPERATOR’S MANUAL STAINLESS STEEL PUSH BEAM TROLLEY 1 TON 2 TON These products meet or exceed the following standards: CE | AS1418.2 ANSI B30.10 (For use with manual or powered hoists) pg.1 P.O. Box 845, Winona, MN 55987 Phone (800) 749-1064 (507) 474-6250 Tech Support (507) 457-3346 Fax (507) 452-5217 sales@ozliftingproducts.com www.ozliftingproducts.
Table of Contents Pg.2 . . . . . . . . . . . . . . . . . . . . . . Product Features Pg.3 . . . . . . . . . . . . . . . . . . . . . . Warranty Pg.4 . . . . . . . . . . . . . . . . . . . . . . Important Information and Precautions/Warnings Pg.5 . . . . . . . . . . . . . . . . . . . . . . Technical Information Pg.6 . . . . . . . . . . . . . . . . . . . . . . Operation/Maintenance Pg.7 . . . . . . . . . . . . . . . . . . . . . .
Warranty OZ Lifting Products LLC® guarantees these products to be free of defects in materials and workmanship for one year from the date of shipment. This warranty does not apply to products that show signs of misuse, overloading, alteration, improper maintenance or negligence. The normal wear and tear of moving parts is excluded from the warranty. Moving parts are defined as brake discs, wire rope and other wear components that are subject to use conditions.
Important Information and Precautions The information in this manual should be used only for the Stainless Series Push Beam Trolley. This manual contains general instructions dealing with the normal installation, operation, and maintenance of the products described herein. The information provided should not be expected to prepare the user for all possible circumstances. These products should not be installed, operated, or maintained by any person who has not read all the contents of these instructions.
Technical Information STAINLESS SERIES PUSH BEAM TROLLEY (1, 2 tons) B A Bail and Wheel Dimensions available at www.ozliftingproducts.com C D Specification PRODUCT CODE OZSS1PBT OZSS2PBT Safe working load (lbs) 2,000 (lbs) 4,000 (lbs) Adjustable flange width (in) 2.5–8 (in) 3.5–8 (in) Max flange thickness (in) 1.06 (in) 1.06 (in) A 13 (in) 13.22 (in) Product dimensions B 9.68 (in) 10.86 (in) C 9 (in) 10.55 (in) D 5 (in) 5.9 (in) Minimum radius curve (ft) 3.
Operation Warnings & Precautions Trolley operators should read and fully comprehend this entire manual and all warnings on the trolleys before beginning operation. If this manual is not read and followed completely, injuries may occur. Operator Requirements: • Be trained in proper trolley operation and in dealing with potential malfunctions. • Abstain from use of alcohol, medications, or drugs while operating. • Avoid operation while tired or distracted.
Parts List (1 ton - 2 ton) No. 1–1 2–1 2–1.1 2–1.2 2–1.3 2–1.4 2–1.5 2–2 2–3 3–1 3–2 3–3 3–5 3–6 3–7 3–8 3–9 4 BEAM TROLLEY PARTS Right plate assy. Left plate assy. Driving wheel Bearing Snap ring Bearing cover Snap ring Name plate Rivet Hanger Shaft Short bushig Long bushing Adjusting washer Thin adjusting washer Step washer Hexagonal castle nut Split pin Hanger plate pg.
P.O. Box 845, Winona, MN 55987 Phone (800) 749-1064 (507) 474-6250 Tech Support (507) 457-3346 Fax (507) 452-5217 sales@ozliftingproducts.com www.ozliftingproducts.com pg.8 Rev.
