Tus neeg siv phau ntawv

Table Of Contents
60.0 mm
240.0 mm
正面
反面
90.0 mm
品牌:ozzie 备注:
第一版,
型号:OZ-P5
设计项目:说明书
文件名称:P5_ozzie_OZ-P5_说明书_折页_01
说明书尺寸:60mm X 90mm(展开尺寸:240mm X 90mm)
工艺说明:105g铜板纸,单色正反面印刷,折页(折扇形).
制作版本:01
Party Box Bluetooth Speaker
OZ-P5
User Manual
BLUETOOTH OPERATION
Turn on the speaker, and search for its bluetooth name P5 in the
device you want to pair and start the paring process, it will give a
prompt tone when the connecon is successful.
Long press the bluetooth buon to disconnect it.
Some bluetooth devices support automac reconnecon; with
those devices, the speaker will automacally reconnect.
The speaker will not automacally reconnect to devices that do
not support automac reconnecon.when it's not connected ,
long press bluetooth buon 3 seconds to connect to the last
disconnected device.
TWS CONNECTION
1.Turn on two speakers and disconnect any paired Bluetooth
devices.
2. Long press the pause buon on one of the speakers, this
speaker will become “MASTER” speaker, unl you hear a
prompt tone and release the pause buon and search another
P5 speaker pairing for up to 60 seconds.
3. It will give a prompt tone aer TWS connected.
4. Connect your Bluetooth device to the P5.
5. Long press the pause buon on one of the speakers to
disconnect TWS pairing.
LIGHT EFFECT
Short press RGB light buon to switch the 4 kinds of light display
effect.
Long press the RGB light buon 3 seconds to turn off the light.
MEMORY CARD OPERATION
Connect a micro SD card and power on the speaker.
AUDIO AUX IN OPERATION
Power the speaker on.
Connect a 3.5 mm audio cable to the speaker and your device.
The speaker is now connected to your device.
signal.
Check via the device’s Bluetooth connecon if the speaker is
connected with the device.

Move the device closer to the speaker or try removing obstacles
between them.

Disconnect other connected devices and then try again. You can
force a disconnecon by moving out of Bluetooth range (10 m).
EXPLANATION
1. The symbol indicates: The product is only suitable for the safe
non-tropical climates.
2. Note: Please use the same type or equivalent type of baery to
replace if the baery is scrapped. Otherwise maybe explosion
occurs.
3. The lithium baery may not be exposed such as fire or excessive
heat.
NOTES BEFORE USE
This product is designed with full aenon for safety performance.
To ensure safe operaon, please follow the following rules:
1. Place the speakers in a stable posion avoid fall and cause
damage or personal injury.
2. Do not drop, disassemble, open, crush, bend, puncture, burn
speaker.
3. Do not close to any heat source (such as radiators, heang
equipment, stoves, or other heat-generang equipment) where
the use of speakers.
4. Please send professional maintenance staff to repair for any
reason damage.
5. Before wiping with a dry cloth to clean the speakers, set the
power switch to the off posion and unplug the power cord
from the power outlet.
This symbol on the product or in the instrucons means that your
electrical and electronic equipment should be disposed at the end
of its life separately from your household waste.
There are separate collecon systems for recycling in the EU.
For more informaon please contact the local authority or your
retailer where you purchased the product.
NOTES FOR BATTERY DISPOSAL
The baeries used with this product contain chemicals that are
harmful to the environment.
To preserve our environment, dispose of used baeries according
to your local laws or regulaons.
Do not dispose of baeries with normal household waste.
For more informaon, please contact the local authority or your
retailer where you purchased the product.
6. Health consideraons, please adjust the volume to a suitable
level.
7. In order to avoid harming the product performance, please do
charge your device each 3 months at least.
SAFETY PRECAUTIONS
Check that the voltage marked on the rang label matches your
mains voltage.
Avoid extreme degrees of temperature, either hot or cold.
Place the unit well away from heat sources such as radiators or
gas/ electric res.
Avoid exposure to direct sunlight and other sources of heat.
Charge the speaker at least once within three month to prevent the
lithium baery from damaging of excessive consumpon.
Always disconnect the unit from the mains power supply before
connecng/disconnecng other devices or moving the unit.
Unplug the unit from the mains power socket during a lightning
storm.
PACKAGE CONTENTS
Bluetooth Speaker x 1
Type C Cable X 1
Wired Microphone x 1
Instrucon Manual x 1
PARTSAND FUNCTIONS
1. Bluetooth indicator.
2. Baery status LED.
3. Bass indicator.
4. Bass buon: Short press to switch on/off the bass.
5. RGB light buon:
Short press to change the 4 kinds of light effect.
Long press to turn off the strobe light, turn it on by default.
6. Volume up buon:
Short press to increase the volume.
Long press to next song.
Long press in AUX mode is volume up.
7. MIC VOL: Turn right to increase the MIC volume, le to decrease
the MIC volume (the MIC channel is only turned on when a MIC
inseron is detected).
8. ECHO: Right rotaon increases the MIC reverberaon intensity,
le rotaon reduces the MIC reverberaon intensity (wireless
and wired microphones are valid).
9. GUITAR VOL: Turn right to increase GUITAR volume, le turn
to decrease GUITAR volume (GUITAR channel is only turned on
when GUITAR inseron is detected).
10. Volume down buon:
Short press to decrease the volume.
Long press to previous song.
11. Power buon: long press to power on/off
12. Pause buon:
Short press pause, play.
Long press connect and disconnect TWS.
13. Bluetooth buon:
Short press to switch the playing mode: BTTF USBAUX.
Long press to disconnect and re-connect the Bluetooth.
14. TF card slot.
15. Type-C charging port.
16. AUX IN Port, reset hole.
17. USB port.
18. Microphone port.
19. Guitar port.
  
11
13
2 31
4
5
10
12
6
7
8
9
14
15
16171819
FEATURES
1. All-In-One Bluetooth Speaker, Karaoke and Portable PA system
with wired Microphone.
2. HD Sound Quality wireless speaker with bass boost technology.
3. Allows you to stream music from almost any device via Bluetooth,
USB, Aux-in and TF Card.
4. Light-Up Speaker System with RGB lighng effects.
5. IPX4 splash-proof protecon.
You can enjoy the party with no worries of water splashing.
6. TWS technology which connects two P5 speaker to create a
stereo channel.
7. Built - In 4500mAh lithium baeries provide connuous 7 hours
of playme.
8. Built-In USB port to play music or work as power bank to
charging your devices.
CHARGING
Connect the supplied charging cable to the charge input and to a
USB port on your computer or to a USB charger .
The charging LED is lit white when charging , and the 5 LED
indicator will be solid white when fully charged.
It is recommended to charge 10 minutes before you power on the
speaker if you 7 days unused, then you can connue to use while
charging.
Low power: the red LED light flashes at the same me as the low
power prompt tone.
1. The low-power prompt voltage is 6.6V, and the baery voltage
is lower than 6.6V to start a low-power alarm, and do soware
an-shake for 30 seconds.
2. Prompt once every 60S, and shut down immediately aer
prompng 3 mes.
3. When the baery voltage is lower than 6.4V, it cannot be turned
on.
4. If the baery voltage is connuously lower than 6.4V within 10S,
the audio system will be turned off immediately (there will be a
prompt tone on the machine).
USB OPERATION
Connect a USB sck to the speaker to play music.
Work as a power bank to charge other USB devices.
MICROPHONE
Connect a wired microphone allow you to Karaoke.
AUTOMATICALLY TURN OFF
The speaker will automacally turn off in 10 minutes when
Bluetooth is not connected and no music is playing.
TECHNICAL PARAMETERS
Model: OZ-P5
Bluetooth: V5.0
Speaker: 30Ω * 1 + 15Ω * 1
Built-in rechargeable baery: 7.4V, 4500mAh
Charging me: 3 hours
Playing me: 7 hours
Input: 5.0V 2.0A
Product Size: 301mm*220mm*185mm
Product Weight: 2500g
Range: Up to 10m
TROUBLESHOOTING

Recharge the speaker.

Reset your speaker,press and hold the reset buon through the
aux port with clip for 6 seconds to Automacally reset the
speaker and turn off.

Adjust the volume.
Make sure that your Bluetooth device is within range.
Ensure there is no obstacles in the way that can block/disturb the

Summary of content (2 pages)