Use and Care Manual

2
WARNING: Spray materials may be harmful if inhaled or allowed to
come into contact with the skin or eyes. Consult the product label
and Material Safety Data Sheet supplied for the spray material.
Follow all safety precautions.
CAUTION: Well ventilated area required to remove fumes, dust or
overspray. Secure airhose and uid hose wrench tight for safety and
to prevent leaks.
Cleaning:
After each use spray your paint solvent through the spray gun and
wipe off the outside with clean solvent. Never leave the entire spray
gun immersed in solvent. Dirty aircaps and tips
should be cleaned by soaking in solvent and then blown clean with
air. Personal safety equipment should be used at all times.
12. 27SC 3oz gravity cup assembly
2. HG-09-08 Aircap (05 & 10 also available)
3. HG-10-08 Fluid tip (05 & 10 also available)
6. HG-11-08 Needle (05 & 10 also available)
A. trigger stroke adjustment knob
B. Fan pattern adjustment knob
C. Air hose attachment inlet (1/4” NPT)
Diagram and spare parts: