Owner's Manual

Complete Radio Replacement with
Integrated Climate Control Retention for select
2015-2018 Ford F150 and 2017-2018 Ford Super Duty
RPK4-FD2201
© 2019 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global.
PAC-audio.com
Pacific Accessory Corporation
Page 10
Rev. V7
Date:020419
VS41 Wiring
These Connections are not used in this application
Radio PRO
Video Output to Radio
Video 1 Input (Default / Reverse Camera)
Video 2 Input (Front Camera)
Video 3 Input (Left Camera)
Video 4 Input (Right Camera)
PLEASE NOTE: Revision 1.0.6.1 of the VS41 is required for this application. If you are adding a front camera and two blind
spot cameras, or any combination of the three, to the aftermarket radio, a VS41 is needed (sold separately). Follow the example
below to make all inputs work accordingly through the reverse camera input on the aftermarket radio.
Steering Wheel Controls
Default Steering Wheel Control Programming
IMPORTANT! The interface comes pre-programmed for all of the vehicles factory SWC functions and does not require
programming unless you wish to re-assign the SWC functions, utilize short press long press dual command functionality, or assign
the programmable 12v output to a SWC button. The SWC can always be restored to default settings by pressing and releasing
the program button on the side of the interface once and waiting 7 seconds for the LED to ash 3 times.
Default SWC Button Assignments
Alpine JVC Kenwood Clarion Pioneer Sony Fusion
Volume +
Volume +
Volume +
Volume +
Volume +
Volume +
Volume +
Volume +
Volume -
Volume -
Volume -
Volume -
Volume -
Volume -
Volume -
Volume -
Mode
Source
Source
Source
Source
Source
Source
Source
Track +
Track +
Track +
Track +
Search +
Track +
Track +
Track +
Track -
Track -
Track -
Track -
Search -
Track -
Track -
Track -
Voice
VR
Voicedial
Voice
VR
VR
VR
Power
Mute
Mute
Mute
Att
Mute
Mute
Mute
Mute
Phone Answer
Receive
Answer
Answer
Send
Answer
Answer
N/P
Phone End
End Reject End End End Reject N/P