Owner's Manual

Complete Radio Replacement with
Integrated Climate Control Retention for select
2015-2018 Ford F150 and 2017-2018 Ford Super Duty
RPK4-FD2201
© 2019 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global.
PAC-audio.com
Pacific Accessory Corporation
Page 11
Rev. V7
Date:020419
Optional Steering Wheel Control Programming
If you wish to re-assign the SWC functions, utilize short press long press dual command functionality, or assign the programmable
12v output to a SWC button, the interface must be programmed in the specic order shown in the chart below. If you come across
a function in the chart that your steering wheel does not have, or you do not want to program, press and release the programming
button on the side of the interface to skip that function. The LED will ash off and on conrming that you have successfully skipped
that function and are ready to proceed to the next one.
Short Press Long Press Dual Command Functionality
This feature allows you to assign two aftermarket radio functions to each of the vehicles SWC buttons. It can be used with as
many of the buttons as the user likes or none at all. When this functionality is implemented, quickly pressing and releasing a SWC
button will initiate the short press command while pressing and holding a SWC button for longer than two seconds will initiate the
long press command. Please note that no long press commands are programmed by default. If you wish to assign dual command
functionality to the SWC please follow the programming steps below.
Programmable 12v Output
The Red / White wire on the interface can be programmed via the RadioPRO app to do a pulsed or latched 12v output which can
then be assigned to any of the vehicle’s factory SWC buttons. When assigned, the factory SWC button will activate the pulsed or
latched output to control external accessories. Please refer to page 12 for more details on how to use the app to set this feature.
Optional SWC Programming Procedure
1. Turn the key to the ignition position.
2. Press and release programming button on the side of the interface. The Status LED will turn green.
3. Within 7 seconds, press the button that is to be learned on the steering wheel. The LED will turn red when the button is pressed.
At this point you have two options:
A. For short press functionality: Release the button within 1.5 seconds. The green LED will turn back on.
B. For long press functionality: Hold the button until the LED starts blinking. Release the button and the LED will
go back to solid green.
4. If you need to program more buttons, repeat step 3 for each additional audio function on the steering wheel.
5. If you come across a function in the chart that your steering wheel does not have, or you do not want to program, press and
release the program button on the side of the interface to skip that function.
6. Once programming is completed, wait seven seconds. The LED will ash three times indicating end of programming.
7. Test the interface for proper functionality. Whenever a SWC is pressed the LED on the interface should blink. If any function
does not work, repeat the programming steps.
Steering Wheel Controls (Cont.)
Alpine JVC
Kenwood
Clarion
Other
-
Pioneer Sony Fusion
1
Volume +
Volume +
Volume +
Volume +
Volume +
Volume +
Volume +
Volume +
2
Volume -
Volume -
Volume -
Volume -
Volume -
Volume -
Volume -
Volume -
3
Mute
Mute
Mute
Mute
Mute
Mute
Mute
Mute
4
Preset +
Source
Source
Source
Preset +
Preset +
Preset +
Source
5
Preset -
Track +
Play
Search +
Preset -
Preset -
Preset -
Track +
6
Source
Track -
Track +
Search -
Source
Source
Source
Track -
7
Track +
Band / Disc +
Track -
Band
Track +
Track +
Track +
Audio
8
Track -
Preset / Disc -
Disc / FM +
Send / End
Track -
Track -
Track -
Power
9
Power
Select
Disc / AM -
Send
Band
Band
Band
12v+ Output
10 Enter / Play Attenuation
Answer
End
Answer
.
Phone Menu
Reject Call /
Source (Bluetooth
equipped radios
only)
11 Band / Program Phone Receive
Voice Dial
VR
END
.
Answer Call Answer / End Call
12 Receive Phone Reject
On Hook
12v+ Output
PTT
.
End Call VR
13
End
Voice Dial
Off Hook
N/P
VR
12v+ Output
14 VR Power
Mute (Multimedia
units only)
12v+ Output 12v+ Output
15
12v+ Output
12v+ Output
Preset +
16
12v+ Output
- - Advent, Boyo, Dual, Lightning Audio, Jensen, Rockford Fosgate & Visteon . - Jensen & Advent ONLY
Optional Programming Order