Owner's Manual

Complete Radio Replacement with
Integrated Climate Control Retention for select
2015-2018 Ford F150 and 2017-2018 Ford Super Duty
RPK4-FD2201
© 2019 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global.
PAC-audio.com
Pacific Accessory Corporation
Page 1
Rev. V7
Date:020419
Introduction & Features
Important Notes
The RPK4-FD2201 is a complete radio replacement kit with integrated climate control retention for the 2015-2018 Ford
F-150 and 2017-2018 Ford Super Duty equipped with the 4” screen. This kit utilizes the factory HVAC control knobs
for a more factory look and experience. This kit also includes all of the modules and cables needed to retain all of the
important features of the factory system such as: steering wheel mounted radio controls, factory reverse camera, AM/
FM reception, and the factory USB port (if equipped). With the addition of the VS41 (sold separately) you can also add
blind spot cameras and a front camera to the aftermarket radio.
1. These instructions only apply to Rev. 1.1.1.8 of the product.
2. We recommend that you read this manual thoroughly to familiarize yourself with the entire process before beginning
installation.
3. Transfer of the factory HVAC knobs, circuit boards, and auxiliary button panel is required. Professional installation is
recommended.
4. WARNING! Failure to install the supplied ribbon cables properly will result in LOSS OF or
INTERMITTENT operation of CLIMATE CONTROLS! Follow instructions carefully!
5. Only compatible in vehicles equipped with the 4” screen.
6. Does not retain SYNC.
7. Does not retain auxiliary input jack in 2015 vehicles equipped with SYNC.
8. Does not retain external temperature displayed on factory screen.
9. Only one of the reverse camera retention harnesses will be used.
10. Does not retain camera zoom on reverse or bed cameras in Super Duty trucks.
11. Please make your vehicle settings selections before removing the factory radio for optimal
installation time. Once the radio has been removed, the vehicle settings, which are normally selected through the factory
radio, can be accessed by downloading and installing the PAC Radio PRO application from http://services.aampglobal.
com/radiopro/updates/downloads/radiopro_setup.exe. Please see page 13 for further details on the Radio PRO app.
12. Once the radio is removed, the chimes will play through the small dash speaker and not the cabin speakers.
13. Use of improper length screws during kit re-assembly can result in damage to this product. Please pay special attention to
Part Three: Step 6, and DO NOT use the 22mm long screws. Damage will occur!! 22mm long screws are only used in Part
Three: Step 9.
Components
1. Dash Panel with HVAC
Control
2. Middle Circuit Board Housing
3. Bottom Circuit Board Housing
4. Pocket (For single DIN
applications)
5. (x2) Radio Brackets (left and
right)
6. AM / FM Antenna Adapter
7. (x2) Reverse Camera
Retention Harness (used only
when equipped with factory
reverse camera. Only one will
be used.)
8. (x2) Ribbon Cables
9. RP4.2 Interface Harness
10. (x8) 6mm Screws
11. (x9) Radio Mounting Screws
12. USB Retention Cable (if
equipped)
13. RP4.2 Interface
Tools needed for installation : 7mm socket, 10mm socket, ratchet, T10 torx screwdriver, small athead screwdriver, plastic panel
removal tool .
1:1
22mm
6mm
16mm