Owner's Manual

Complete Radio Replacement with
Integrated Climate Control Retention for select
2015-2018 Ford F150 and 2017-2018 Ford Super Duty
RPK4-FD2201
© 2019 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global.
PAC-audio.com
Pacific Accessory Corporation
Page 6
Rev. V7
Date:020419
Assembly of Aftermarket Dash Kit (cont.)
4. Install the temperature and fan
speed knobs as shown. Please
make sure that the white line on
the temperature control knob is
centered at the top.
5. Install the bottom circuit board as
shown. Make sure that the rubber
pads on the board t snugly into the
previously installed knobs.
6. Using the (8) 16mm screws you
kept from Part Two:Steps 7 & 11,
secure the circuit board to the
panel as shown.
7. Install the black plastic gear as
shown. Make sure the alignment
mark on the gear is pointing at the
gear attached to the temperature
control knob.
8. Install the bottom circuit board
housing as shown.
9. Using the (3) 22mm T10 screws
you Part Two: Step 3, secure the
circuit board housing to the panel
as shown.
1:1
16mm
1:1
22mm