Owner's manual

BEDLOCKER
®
07 TUNDRA
6
Peel the foam backing and attach the foam to the front sill of the truck bed as shown in
FIG. 8.
Place the top cover on the canister opening and install the (2) Black Top Cover Screws into
the attachment blocks mounted to the inside of the canister.
Hold the top cover tight against the cab side of the box while tightening.
(The top cover can be adjusted slightly to align evenly with the ribbed blanket)
STEP 9: ATTACHING FOAM TO FRONT SILL & TOP COVER
HARDWARE USED:
BLACK TOP COVER
SCREW x 2
You have now completed the installation of the Bedlocker Electric hard tonneau cover. If you have any questions
please do not hesitate to call us at: [phone] and ask for our technical service department.
FRONT SILL OF
TRUCK BED
TOP COVER
FOAM
CLOSE CELL FOAM x 1