Manualshelf

Owner manual

ManualsBrandsPach and Company ManualsAccessories communicationAeGIS NPB9000 Series Manual
11121314151617181920
Figure 2.4 RS-232 CONNECTOR
2.2 Testing and Verifying the Installation
You must verify your telephone installation by calling every tenant. The easiest way to verify the installation is by connecting
a standard telephone to ES1 and ES2 on the Main Relay Control Panel (see figure 2.2) and figure 2.4.
Call every tenant using the standard phone as follows (see also table 2.3):
Step 1: Lift the handset and wait for “Two Long Beeps”. You also hear the relay click.
Step 2: Press # and the 4-digit relay number (i.e #0001, for relay #1) and the LED #1 on relay# 1 turns ON and the tenant
phone connected to relay# should ring. Always check the tenant phone, do not depend on the LED on the relay.
Step3: Hang-up and repeat step 2 to test the next relay number.
Relay Board DIP
Switches Setting
Each relay board in the Main Relay Control Panel and the Extended Relay panel represents 12 tenants. For example:
MS79024 consists of Main Control board and two relay boards. The last three digit represents the number of tenant. The
MX79xxx is needed to configure more than 120 tenants. See table 1.1 for DIP Switch setting.
Table 2.1 MS79012 - MS7910, MX79012 - MX79120 DIP SWITCHES SETTING
Pach and Company Chapter 2 Page 10
AeGIS NPB9000 Series INSTALLATION 05/01/02
ES1
ES2
Figure 2.4
MODEL MS79012 - MS79120 Main Relay Control Panel or MX79012-MX79120 Expansion Relay Panel
Relay # / Switch # 1 2 3 4 5 6 7 8 9 10
Relay 1 (1-12 tenants) ON OFF OFF OFF OFF OFF OFF OFF OFF OFF
Relay 2 (13-24 tenants) OFF ON OFF OFF OFF OFF OFF OFF OFF OFF
Relay 3 (25-36 tenants) OFF OFF ON OFF OFF OFF OFF OFF OFF OFF
Relay 4 (37-48 tenants) OFF OFF OFF ON OFF OFF OFF OFF OFF OFF
Relay 5 (49-60 tenants) OFF OFF OFF OFF ON OFF OFF OFF OFF OFF
Relay 6 (61-72 tenants) OFF OFF OFF OFF OFF ON OFF OFF OFF OFF
Relay 7 (73-84 tenants) OFF OFF OFF OFF OFF OFF ON OFF OFF OFF
Relay 8 (85-96 tenants) OFF OFF OFF OFF OFF OFF OFF ON OFF OFF
Relay 10 (109-120 tenants) OFF OFF OFF OFF OFF OFF OFF OFF OFF ON
Relay 9 (97-108 tenants) OFF OFF OFF OFF OFF OFF OFF OFF ON OFF